I think this would be cool to have.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Ry' N Jen

Banned
Joined
Dec 26, 2006
Messages
9,242
Reaction score
13
Location
Slightly North of the 49° th. Parallel... In HongC
Only then for two tires and two Jerry cans!

I like the 35" wide x 22" x 4" deep x 100lb payload capacity cargo rack.
Then Jen and I can carry even more crap with us!
You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach

I wonder how bad this would effect departure angles?


You must be registered for see images attach



You must be registered for see images attach

They should make this wedge lock for a ball mount. Good idea.


Here's a link if anybody want's more info:
http://www.tiregate.com/hg_series_0.shtml
 
Last edited:

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,450
Reaction score
3,656
Location
Southeastern Ohio
departure angles on a stock KJ would not be good, now if you did the bumpser cut and installed a KK hitch on it that would give you about 3 inches or more to play with so would be a little better
How much are they though ??
Didn't look
 

Ry' N Jen

Banned
Joined
Dec 26, 2006
Messages
9,242
Reaction score
13
Location
Slightly North of the 49° th. Parallel... In HongC
departure angles on a stock KJ would not be good, now if you did the bumpser cut and installed a KK hitch on it that would give you about 3 inches or more to play with so would be a little better
How much are they though ??
Didn't look

Ya, I was thinking about your former KK trailer hitch!
I was also thinking of removing the rear bumper.
Nice thing about this is that you'd have some rear jacking points.

No prices on the site Tom.
But if it costs around the same as a Rock Lizard rear bumper, then I'd go for that instead!
 
Top