Help! Tire size and wheel offset

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,456
Reaction score
3,642
Location
Southeastern Ohio
Back-
spacing​
3.25 in.​
3.5 in.​
3.75 in.​
4.0 in.
4.25 in.​
4.5 in.​
5.0 in.
5.25 in.​
5.5 in.​
5.75 in.​
6.0 in.​
Wheel Width​
Offset (mm)​
5.5 in.​
0​
6​
12​
19​
25​
32​
44​
52​
57​
63​
69​
6.0 in.​
-6.4​
0​
6​
12​
19​
25​
38​
44​
51​
57​
63​
6.5 in.​
-12​
-6​
0​
6​
12​
19​
32​
38​
44​
51​
57​
7.0 in.
-19​
-12​
-6​
0
6​
12​
25​
32​
38​
44​
51​
8.0 in.
-32​
-25​
-19​
-12​
-6​
0​
12
19​
25​
32​
38​
8.5 in.​
-38​
-32​
-25​
-19​
-12​
-6​
6​
12​
19​
25​
32​
9.0 in.​
-44​
-38​
-32​
-25​
-19​
-12​
0​
6​
12​
19​
25​
9.5 in.​
-51​
-44​
-38​
-32​
-25​
-19​
-6​
0​
6​
12​
19​
10.0 in.​
-57​
-51​
-44​
-38​
-32​
-25​
-12​
-6​
0​
6​
12​
10.5 in.​
-63​
-57​
-51​
-44​
-38​
-32​
-19​
-12​
-6​
0​
6​
11.0 in.​
-69​
-63​
-57​
-51​
-44​
-38​
-25​
-19​
-12​
-6​
0​
12.0 in.​
-69​
-63​
-57​
-51​
-38​
-32​
-25​
-19​
-6​
 

Rstep21

New Member
Joined
Mar 23, 2022
Messages
10
Reaction score
1
Hi Tom
I just installed a lift on my 06 KJ with the 3.7. I used OME 927 with Bilstein 24-282642 on the front with a rough country 2.5 on the rear. The measurement for the front from center to flare is 22.5 and the rear is 20.5. I haven’t driven the Jeep but maybe a mile because it has no tag for now. What can I do to get the rear up to match the front besides changing the springs and shocks again? Also, what size tire can I run with a 17” wheel and can I run a wrangler wheel with an adapter and do you know anyone with a set of UCA’s for sale. Thanks
 

Dirtyrat

New Member
Joined
Jan 29, 2022
Messages
17
Reaction score
3
Hello guys I have a 2009 Jeep Liberty North Edition and I just lifted it with 2.5 Suspension lift from Rough Country and I'm planning to buy a new set of wheels and all terrain tires. Does anyone runs with 16x8 with zero offset? And what size of tires that will fit this setup? Please help!
I have the OME 3.5” lift and subframe drop. Run 265/65R17 tires and a zero offset. Did do a very small bit of trimming and removed the inner fenders.
 

Rstep21

New Member
Joined
Mar 23, 2022
Messages
10
Reaction score
1
I have the OME 3.5” lift and subframe drop. Run 265/65R17 tires and a zero offset. Did do a very small bit of trimming and removed the inner fenders.
Are you running the UCA’s and what did you do to do the subframe drop?
 

Dirtyrat

New Member
Joined
Jan 29, 2022
Messages
17
Reaction score
3
Are you running the UCA’s and what did you do to do the subframe drop?
I just got some one inch spacers. Jack the vehicle up
Dropped my front sway bar for access to bolts
Then loosened 4 bolts to an inch or so
And removed one bolt at a time inverting the spacer, purchased at Home Depot, then after all spacers are in tighten up and reinstall the sway bar. Easy job. But I am looking for better spacers. I think they should be wider than I have.
 

Latest posts

Members online

Top