Good scanner

[Geralt]

Hi,
I found a good, inexpensive scanner that works with my old 2003 KJ.
It's an XTOOL A30M V2.0.

XTOOL Anyscan A30M BT Connection OBD2 Scanner Automatic Car Code Reader

XTOOL A30M V2.0 OBD2 Scanner offers full system diagnostics, bi-directional control, CAN FD, FCA AutoAuth, 23+ services, wireless Bluetooth, and lifetime free updates.

www.xtoolglobal.com

 

[eric1514]

Hi,
I found a good, inexpensive scanner that works with my old 2003 KJ.
It's an XTOOL A30M V2.0.

XTOOL Anyscan A30M BT Connection OBD2 Scanner Automatic Car Code Reader

XTOOL A30M V2.0 OBD2 Scanner offers full system diagnostics, bi-directional control, CAN FD, FCA AutoAuth, 23+ services, wireless Bluetooth, and lifetime free updates.

www.xtoolglobal.com

Does it see the TPMS? I'd love to turn off the light on my dash.

Also, I have the Ediag Elite and it does not see my 2005 KJ.

 

[u2slow]

I have been able to get every error code with 3 cycles of the ignition. No scanner needed. Thanks Mopar!

 

[Geralt]

Does it see the TPMS? I'd love to turn off the light on my dash.

Also, I have the Ediag Elite and it does not see my 2005 KJ.

I don't know, because I don't have TPMS on my 2003 model,
but the app has a lot of features, and updates are free.

 

[Geralt]

@u2slow
Me too, but you need a scanner to clear the error codes.

 

[u2slow]

@u2slow
Me too, but you need a scanner to clear the error codes.

So far, that is not the case.

 

[Geralt]

It's good for u.

I have just one fault code, P0070, indicating a fault in the ambient air temperature sensor circuit; I clear it, but it comes back.
I need to replace that sensor.

 

[u2slow]

I've had lots of faults. Usually they go away after checking, or go away on their own later. Or disconnect the battery for a bit to start fresh.

Cruise and the 'gas-cap' codes are common for me.