twack
Full Access Member
Ok so my stock struts are shot, and its time for an upgrade. I got OME 925 1.5in light duty coils, Rancho RSX17505 struts to replace the old and worn parts. Right now it has a daystar 2.5 lift on 02 coils. I want to use the daystar kit with the new stuff i got. I have no problems cutting the front spacers down to make them smaller to work properly. I want to stick with the stock a arms for now but im wondering how much i should cut off the front spacer and what you guys thought. Im sticking with stock coils and and durango shocks in the back with the daystar spacer. anyy thoughts would be cool, i also have no problem putting some more spacer in later after it sags to where it will sit
cliff notes
1-How much lift can i do on stock a arms
2- how much should i cut the daystar front spacers to get full 2.5 of lift
3- which strut plate should i use daystar or stocker
cliff notes
1-How much lift can i do on stock a arms
2- how much should i cut the daystar front spacers to get full 2.5 of lift
3- which strut plate should i use daystar or stocker
Last edited: