Finished Bedliner

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

WickedBruce

Full Access Member
Joined
Apr 8, 2012
Messages
867
Reaction score
7
Location
San Antonio TX
Just finished it up. Ran out of it so I couldnt do the beltline today. Gonna do my wheels just like my spare today though! This weather is nice =D

3718-rear.jpg


3717-front.jpg


3716-finished-side.jpg


3714-back.jpg
 

badkittystt

Full Access Member
Joined
Nov 16, 2010
Messages
530
Reaction score
3
Location
St. Thomas, USVI
That came out really nice! I'd like to know what you used as well :) Also if you'd like to come down and do some work on Mr. Darcy for me because i know even with a full write-up my lazy a** will probably never get around to it...
 

WickedBruce

Full Access Member
Joined
Apr 8, 2012
Messages
867
Reaction score
7
Location
San Antonio TX
Hey guys I used Dupli color Bed Armor. I was very cautious of the spray stuff...because I know it's no where near as good as the roll-on stuff...but at $99 a gallon, I took the cheaper route and paid like $50 for 5 cans. It's about $12 a can. Anyhow...for the price the result isn't half bad. I like it. If you decide to use this, I strongly recommend heating up the cans before you use them. I took all the parts off, scuffed them with some sand paper and then went to work. I put one can in a bowl of super hot water and let it sit for about 20 minutes...took that one out for use, and threw in another. I sprayed about 4 or 5 coats on every piece, just constantly rotating cans. You'll know when its time to rotate out because it sprays like s***. When it's warm its a nice even flow. Cold is spot and runs down the front of the can. And badkitty, I'd love to come down if you pay for my plane ticket =)
 

Glaze6688

New Member
Joined
Dec 20, 2011
Messages
2
Reaction score
0
Location
Indiana
Thanks wickedbruce I might have to try this when it warms up a bit. Your jeep looks sweet by the way.
 

WickedBruce

Full Access Member
Joined
Apr 8, 2012
Messages
867
Reaction score
7
Location
San Antonio TX
did you paint your tail lights? and if so what did u use?

Yes I did paint them with. With plasti dip. I wasnt sure if it was legal so i wanted something i could remove...just like my eyelids.


Thanks wickedbruce I might have to try this when it warms up a bit. Your jeep looks sweet by the way.

Thanks alot. I'm glad it was decent out today. Was out there in my sweats and no shirt and was pretty comfortable.



Calm down Elmer! lol
 

Elmer

Full Access Member
Joined
Sep 4, 2012
Messages
249
Reaction score
1
Location
Delmarva
Haha wooops. In any case, your KJ is looking really good Bruce. Nice job with the bedliner.
 
Top