Finally got around to doing my front hooks

[Moab]

Yeah, finally put my Chrysler front hooks on...Big deal, right...well it is to me.
The supplied u bolts and slip nuts made it a snap. Nice when a job is this easy and goes smoothly...NEXT....

 

[ChiefRudy]

That was my first mod i did to my KJ. I installed them the 2nd weekend after i bought it. They do go on pretty easy. The only thing I nervous about was cutting the openings in the bumper for the hooks.

NEXT... you can install a hitch. Then you can have a recovery point in the rear. Four Bolts and it done.

 

[HoosierJeeper]

It took me 6 hours with the Mopar kit...

 

[Moab]

Luckily my KJ came with a tow hitch.
The upper control arms and strut swop...now that was a job - but well worth every minute. I did add top of strut plates. The best reward for that job was seeing those ball joint angles straighten up aside from the ride improvement.

 

[TAwesome]

Pics???

 

[KornyBrad]

I finally got me a set of hooks off of Ebay and will be removing the rv hookups and installing the tow hooks soon!

 

[Porkchop]

Yeah, finally put my Chrysler front hooks on...Big deal, right...well it is to me.
The supplied u bolts and slip nuts made it a snap. Nice when a job is this easy and goes smoothly...NEXT....

It is a big deal when you get stuck. well it is to me too.

 

[Dave]

Hooks and skids were the first 2 things I did to mine.

I cut the bumper out with a dremel.

Dave

 

[m_volyrakis]

Pics???

X2
pics to prove it or it never happened!

 

[Moab]

OK here you go:

You must be registered for see images attach

 

[HoosierJeeper]

Looks nice. I need to cut the slots on mine out.

 

[ThunderbirdJunkie]

It took me 6 hours with the Mopar kit...

wat
You serious?

 

[Ry' N Jen]

It didn't even take me that long to install the Backbone and winch!

 

[HoosierJeeper]

wat
You serious?

The M bolt fell over in the frame. Spent about an hour trying to get out, before just removing the bumper.

 

[Ry' N Jen]

The M bolt fell over in the frame. Spent about an hour trying to get out, before just removing the bumper.

That ***** when that happens!

 

[67Customs]

It took me 6 hours with the Mopar kit...

Man, it took me about 2 hours and that included trimming out the bumper cutout.

Sup with dat?

I greased the sway bushing while I was down there.

*Edit*

Oh.lol

The M bolt fell over in the frame. Spent about an hour trying to get out, before just removing the bumper.

 

[HoosierJeeper]

That ***** when that happens!

It does, but at least I can remove the bumper now with out direction.

Man, it took me about 2 hours and that included trimming out the bumper cutout.

Sup with dat?

I greased the sway bushing while I was down there.

I need to do that too...another 6 hours...