Exterior Lites

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Hammer

Full Access Member
Joined
Nov 26, 2004
Messages
55
Reaction score
0
Location
Naperville, IL. & Newport Beach, CA
I'm currently shopping for lights. Everywhere I look, I only see lights sold as single or in pairs (as in two in a set). My thought was to add four KC Black SlimLites to a Wilderness rack. My question is, do I have to buy two sets (as in four total) and have two switches on the dash or is there a wiring harness (with one switch) I can install to operate all four lites?

- Hammer.
 

Bennett

Active Member
Administrator
Joined
Sep 8, 2004
Messages
5,387
Reaction score
2
Location
Green Bay
I always tend to throw away the wiring harnesses and make my own.

You can either buy the lights separately or buy the two packs of them.

If you wanted to reuse the wiring harnesses it is entirely possible to do. When it comes to wiring them up, all you have to do is connect the two relays together with a jumper wire, so you have one switch.

Bennett
 

deep6blue

New Member
Joined
Nov 22, 2004
Messages
21
Reaction score
0
I agree with bennett. I don't usually use the wire that comes with the lights. And just jumper the relays together so you only need one switch.
 

Members online

Top