Cruise control differences between 03 and 04 if any

[tommudd]

Does any one know for sure what the difference maybe if any between the 03 and 04 cruise along with all steering wheel buttons etc
Can ya rob an 04 and refit it to an 03 ?
Been looking at parts numbers but not helping
any one know

 

[teeje]

Does any one know for sure what the difference maybe if any between the 03 and 04 cruise along with all steering wheel buttons etc

Can ya rob an 04 and refit it to an 03 ?

Been looking at parts numbers but not helping

any one know

Buttons stay the same and so do the harnesses behind the airbag. I'm almost positive it's all the same being I grabbed cruise control from an 04 to put on an 02(I think it was an 04)
If it's vacuum operated which I'm 90% sure it is, basically plug and play.


Sent from my iPhone using Tapatalk

 

[tommudd]

Buttons stay the same and so do the harnesses behind the airbag. I'm almost positive it's all the same being I grabbed cruise control from an 04 to put on an 02(I think it was an 04)
If it's vacuum operated which I'm 90% sure it is, basically plug and play.


Sent from my iPhone using Tapatalk

Was about 97.2 % sure but wanted to check before I started something
My 03 didn't have cruise and there are times when I sort of miss it

 

[LibertyTC]

IDK what the ones with radio controls are configured like..
My 04 has both sides taken up with cruise buttons.
56766[/ATTACH]"]

You must be registered for see images attach

 

[uss2defiant]

looks the same on my 03

 

[teeje]

IDK what the ones with radio controls are configured like..
My 04 has both sides taken up with cruise buttons.
[ATTACH=full]56768[/ATTACH]

Doesn't matter if you have radio controls. Only difference is the clockspring has 4/5 pins instead of 2


Sent from my iPhone using Tapatalk

 

[tommudd]

I've installed new factory units on an 05 and and 07, but never pulled one from from a junker , not much to them really so should be simple and wiring is there.

 

[95whtzr2]

IDK what the ones with radio controls are configured like..
My 04 has both sides taken up with cruise buttons.
56769[/ATTACH]"]

You must be registered for see images attach

I believe the radio controls go on the backside of the wheel, there are little plastic inserts back there. My dodge has the same configuration of cruise on the front and radio on the back.

 

[Tog]

Radio controls on an 04 on the back of the wheel cruise on the front

Sent from my SM-G930F using Tapatalk

 

[teeje]

Radio controls on an 04 on the back of the wheel cruise on the front

Sent from my SM-G930F using Tapatalk

He was referring to the wiring. If you pull cruise from a junker that has the steering wheel control buttons, you can still use the cruise part just not the steering wheel control buttons. They use different clocksprings.


Sent from my iPhone using Tapatalk

 

[tommudd]

He was referring to the wiring. If you pull cruise from a junker that has the steering wheel control buttons, you can still use the cruise part just not the steering wheel control buttons. They use different clocksprings.


Sent from my iPhone using Tapatalk

Really? Never had to do anything to the clock spring on the ones we installed , interesting

 

[teeje]

Really? Never had to do anything to the clock spring on the ones we installed , interesting

Yup. Some have a two pin connector for the cruise buttons, some have 5. 2 pin=no steerig wheel controls 5pin=cruise and steering wheel control


Sent from my iPhone using Tapatalk

 

[tommudd]

Yup. Some have a two pin connector for the cruise buttons, some have 5. 2 pin=no steerig wheel controls 5pin=cruise and steering wheel control


Sent from my iPhone using Tapatalk

Oh well so much for that idea.............:favorites68:

 

[teeje]

Oh well so much for that idea.............:favorites68:

If your jeep doesn't have cruise, just pull the buttons and harness regardless of the steering wheel controls. Plug in the cruise control servo and you're good


Sent from my iPhone using Tapatalk