Brake line relocation bracket

[tommudd]

really simple to make one
piece of flat steel 5 inches long 1 inch wide, make bends 90 degrees one inch in on each end, drill hole through each end, bolt one end to body of the KJ, bolt brake line to the other end .....done

 

[TheSurvivor]

really simple to make one
piece of flat steel 5 inches long 1 inch wide, make bends 90 degrees one inch in on each end, drill hole through each end, bolt one end to body of the KJ, bolt brake line to the other end .....done

How many do I need?

 

[Porkchop]

One on the left rear where it drops down on an 06.

 

[tjkj2002]

How many do I need?

You will need 2 for a '06 since you have 2 brakes lines going to the rear.Only 1 is needed for '02-'05 KJ's.

 

[TheSurvivor]

You will need 2 for a '06 since you have 2 brakes lines going to the rear.Only 1 is needed for '02-'05 KJ's.

Ok I looked at the link but cant tell, are they both the same thing? Or is one bracket different then the other?

Also will this work?
http://www.homedepot.com/p/Metal-Products-5-in-x-8-in-Steel-Safety-Plate-HD536-85/202274013

 

[featherlight]

Is the brake line relocation bracket necessary if I'm doing an Ironman Spring Lift HD kit on my '07 KJ? I'm not adding anything else for more height. Should be about 2 inches of lift (JBA site now says 1.5").

 

[Gyro]

Better safe than sorry.

Gyro

 

[tommudd]

Thanks for checking!

???