Another lifted KJ done at Mudds Garage

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,456
Reaction score
3,643
Location
Southeastern Ohio
Did an 02 KJ today for RenegadeMarine from Michigan
03CDKJ and I
started out with a low rider KJ
You must be registered for see images attach

You must be registered for see images attach

Then after an hour and a half and an alignment
it turned into this :eek:
You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach
 

riptricket

Full Access Member
Joined
Mar 29, 2007
Messages
344
Reaction score
0
Location
OKLAHOMA
What does the lift consist of?
Also, are those stock 235/70/16's?
Looks awesome and I wish I could get my lift!!!
 

Dave

Administrator
KJ Supporting Member
KK Supporting Member
Joined
Feb 22, 2006
Messages
15,567
Reaction score
15
Location
on here
Nice work Tom. I wish you were closer to me.

Dave
 

jnaut

Full Access Member
Joined
Apr 17, 2008
Messages
2,233
Reaction score
9
Location
Seattle
Hour and a half. You must have this down to a science, Tommudd. Call me when you're in Seattle.
 

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,456
Reaction score
3,643
Location
Southeastern Ohio
Lift consisted of OME coils, 927s/948s
shocks were Ranchos
Boiler top plate, with two ring clevis front
two extra top isolators in the rear
tires are 245-70-16s
We do everything by hand in my garage, no air tools, front springs were laying on the floor in less than 30 minutes, rear from time we started to jack it up until springs / shocks/ holes drilled for bumpstops and them installed was also just under 30 minutes.
Reinstalling the front was faster going in than coming out :cool:

Have to stop and count but this is the I think 17th one not including ones we did at M&Gs
 
Last edited:

HoosierJeeper

Gold Supporter/Admin
Staff member
Administrator
Joined
Jan 20, 2009
Messages
20,858
Reaction score
269
Location
Western WI
And your neighbor still hasn't finished painting that side of his house.... :D
 

bmrrwolfe

Full Access Member
Joined
Jul 23, 2009
Messages
1,756
Reaction score
0
Location
North Olmsted, OH
Lift consisted of OME coils, 927s/948s
shocks were Ranchos
Boiler top plate, with two ring clevis front
two extra top isolators in the rear
tires are 245-70-16s
We do everything by hand in my garage, no air tools, front springs were laying on the floor in less than 30 minutes, rear from time we started to jack it up until springs / shocks/ holes drilled for bumpstops and them installed was also just under 30 minutes.
Reinstalling the front was faster going in than coming out :cool:

Have to stop and count but this is the I think 17th one not including ones we did at M&Gs

Damn when i can afford to do mine i might need to borrow you! Possibly tempt you with a 12 pack?!
(beerthought)(Cheers)
 

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,456
Reaction score
3,643
Location
Southeastern Ohio
Problem is a 12 pack would last me a year I don't drink like I did 30 years ago;)
 

Latest posts

Members online

No members online now.
Top