Another Lift Kit Question

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

lfhoward

Well-Known Member
KJ Supporting Member
Joined
Dec 9, 2012
Messages
2,242
Reaction score
2,425
Location
Philadelphia, PA
My guess is that with 2.5 inches of lift, the rear sway bar links should be 2.5 inches longer than stock to retain the same geometry. If they are longer than stock but not quite as long as stock+lift height, they will still be an improvement over the stock ones. I have a 4 inch lift and until I changed my rear sway bar links they were limiting axle travel and making for a rough ride. (I am running JBA links which unfortunately you can’t get anymore.)
 

archiacpenguin

New Member
Joined
Feb 1, 2022
Messages
19
Reaction score
8
Probably have to go custom. You wouldn't happen to have the specs for the jbas would you?
 

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,456
Reaction score
3,642
Location
Southeastern Ohio
Find a Fab Shop, have them cut a new set of stock ones and add in a 1.5 - 2 inch round bar stock
That should do it
I forget anymore how long lfhowards were when we installed them exactly
 

Latest posts

Members online

Top