Search results

Rubicon wheels with BFG AT 245-70-R16 Well, i decided to still use the same old tires 245-70-R16 with the Moab wheels and I have some rubbing in the front trim (fog light doors) at full lock and with out flex So, if I want to upgrade to 245-75-R16 (not any more 265-70-R16), i need to...

thanks, only OME lift with one ring clevis lift, nothing else in the front and neither on the back 21.5" fender height all around

Have a 2004 KJ with OME Lift, Al-arms, teraflex front bumpstops and (2) hockey puck on the rear, now i will upgrade my wheels with the rubicon moab 16 and i was wonder if i can fit BFG AT 265/70/R16 with out trim? any one with this configuration? or is better to use BFG AT 245/75/R16? Thanks...

I broke mine too, has anyone find this connector aftermarket? At dealer they sold the entire wiring cables for $500 Thanks

Thanks! My mistake in choose N132 instead the long travel, they were on back order How much extra lift could I have with an extra upper isolator? I gain 3" with the 948 springs

Finally I have installed the OME HD suspension on my 2004 KJ, the rear shocks are the standard length N132, my question is, can I put an extra isolator on the rear suspension with the OME 948 springs? If the answer is yes, which one should I use, the upper or lower iso? I think the lower one is...

I didn't find this question I just order the following configuration for the rear suspension: OME 948 springs OME N132 shocks Lower and upper coils springs isolator for each side Can I use both isolator (lower & upper) with this shock or I should have requested the N132L long shock? Thanks

wich are the parts numbers for the bilstein Struts and Shocks (front and rear) for a lifted KJ? Tks!

Ok I found that the only way to go with ranchos is on the rear suspension with the RS9000XL with lift Are they ok?

What about the ranchos RS5000 front struts and rear shocks?

I have the front and rear coils OME 927 and 948 ready to install in my 2004 kj, what option do I have for the struts and shocks after the rancho RSX 17505 are discontinued? Thanks

I was having the same issue... Last week i change the belt tensioner and the belt (Mopar), but we saw that the new belt was a little more big than the original, we install the new belt and after a couple of days it begans the noise at low RPMs (R or D) or when you turn the steering (only with...

i have the same noise from the starter motor, quick .5 second to 1.5 second, do the starter need a preventive maintenance or is normal? the temperature here is 80-90 F and the noise still there

is the same lift you get with OME Heavy Duty (927) and the OME Medium Duty (926) springs at the front? with stock bumper...

its the only way to go, use the vacuum cleaner? or its a way to take out that "filter"?

alignment after OME lift So I understand that after any lift the KJ will not get the proper alignment like the stock lift? How bad can be this driving at higher speeds?

ok tks, now i understand that i dont need to spend in the ALs arm after the 3rd NO!, so when is this arm necessary? what is the difference between this and the stock one?

and also with bigger tires even if i also put bigger tires? 255/70/R16 or 245/75/R16

Planning to order and put the OME Medium Duty springs and Struts (and shocks also for the rear) with out clevis lift and/or spacers, im looking only for 1.5-2" lift, do i need the Als A-Arms or not?

new OEM drive shaft i Just put yesterday my new Front DS, it was very easy, took 1.5 hrs these are the pics