Search results

Now that I’ve replaced downstream o2 s, coils, plugs, injectors, iac and tps. I’m getting p0203. New injectors. What do I do?

EVERY time I replace something I get a new code, replaced the downstream o2s per codes. replaced crank and cam sensors per suggestions, replaced TPS per suggestion. replaced all coils per 2 coil code, and replaced plugs(no clue how long they've been in there) Now I'm getting a P0124,P0203,P0204...

I’m suspicious tho because all these codes appeared literally overnight.

Also now p1388 asd relay

p0505 IAC motor circuits p0500 VSS not detected(new sensor and harness) p0353 Ignition Coil # 3 Primary Circuit p0352 Ignition Coil # 2 Primary Circuit p0351 Ignition Coil # 1 Primary Circuit p0141 1/2 O2 Sensor Heater Failure p0161 2/2 O2 Sensor Heater Failure found those using the...

thinking IAC was bad, replacing that, but really rough idle. replaced plugs.. unsure about ign coils. two plugs smelled of gas/wet. maybe a valve cover gasket leak i think. plus a intermittent tap from valve cover area. please help its my only vehicle

But I don’t have ABS tho

Type 35

I’m at work right now but yes that matches my brake block Wait.. the instrument has been replaced by previous owner. Could that be the issue? Is there a way to relearn the cluster?

sadly i dont really have access to a shop scanner

torque BT OBD to my phone

the only code im pulling is P0455 (M) Evap Leak (we will cross that bridge later)

I have already replaced both the sensor and harness. all readings are accurate at the VSS/ABS sensor, and I have speedometer function. I'm stumped... been pouring over service manual but there isn't any clear directions to look for next. What I don't get is my Libby doesn't have ABS at all...

no luck there... i have previously replaced the rear diff VSS/"ABS" sensor and harness (the closest thing i have to "ABS")..

about to try that, will report back..

'02 liberty has ABS light on...i dont have ABS in this one....WHY???

I have an odd problem. Intermittently, I'll get a no start no crank, just a strong click from the starter... Not really having frequent long cranks. where do I even begin to look?