Search results

Is there a easier way to remove the fog light assembly without taking off the whole bumper? There in bumper

I think im just going to tap them into the headlights, so when it switch to high beam they turn off.

I do have a set from a 05 and once plugged in they work, but i guess marker lights on another harness. So fog lights or marker lights i guess.

Just changed it out, but still nothing.

No i didn't, they look the same

Ill check the relay, wires aren't cut or anything.

My 04 liberty didn't come with fog lights. I have a 02 for parts so i took front bumper with fog lights and harness, but there not working. Any ideas

I see all the posts, but still not getting a straight answer. I have a bad 02 motor and also have a good 05 complete liberty. Can i put the 05 motor trans wiring harness with ecu and bcu in the 02? I also can take steering column and anything else off 05. Will this work? Thanks

Do you know which parts? Cam sprocket, crank sprocket and what else?

So with the crank ring and cam sprocket is it that involved? Looks like the cam sprocket is just removing the valve cover. The crank ring idk about.

Drivetrain and bcm swap If i use everything from the 05 will it work in the 02? Motor trans engine harness bcm anything else?

Any other views on this?

Wouldn't that be easier then getting into the motor and swapping cam and crank parts?

Already pulled it as one unit. What parts need to be changed? The crank ring and cam sprocket? I figured with having the haness and computer i wouldn't have to.

Ive looked at all the post about overview, but my question is with having the motor trans and complete harness would it work? Im pulling the harness and ecm with the motor and trans at the same time. Would i need anything else from the 05 to make the swap? Fuse box in engine compartment? Thanks...

What do you mean?

Just registered because i was told this was the best place to get good info on liberty's. So here goes. Ive got a 02 sport 3.7 2wd automatic with blown motor. I also have a 05 with 3.7 2wd automatic that runs great, but totaled. Can i pull motor, trany and engine harness with ecm and drop it...