Search results

  1. Banditsteve

    Front Drive Shaft Angle................

    I guess from all the wows etc that this isn't normal then!! Hehe. How come I am still sat at 18 3/4 inch then? Should the drive shafts be straight or even angled up a bit then? Even on standard springs? :smokin:
  2. Banditsteve

    Front Drive Shaft Angle................

    Hi All, Just wondered what you guys think about this? I noticed a couple of weeks ago when I was cleaning my Jeep and I have just got round to taking some photos to show you. The front drive shafts sit at a bit of an angle! Is this normal? I know it is a bit awkward to tell from the photos...
  3. Banditsteve

    Manual trans wont go in any gear

    Welcome to "The Family" by the way! Sorry, I didn't notice Ur new here. Lots of nice people here so there will always be some good advice for you. :smokin:
  4. Banditsteve

    Manual trans wont go in any gear

    I had the same problem with my 02 4 banger when I got it and it turned out to be the dual mass flywheel. Not saying yours is definitely the same but it sounds like you will need to have a guess as i believe the clutch hydraulic system comes as one part. Master cylinder, slave cylinder and pipe...
  5. Banditsteve

    Cargo Space weight limit

    And The Three Yorkshireman. I can relate to that cos I am one! Hehe. :smokin:
  6. Banditsteve

    Cargo Space weight limit

    http://www.youtube.com/watch?v=teMlv3ripSM Gone slightly off topic here but what the hell............... Hehe :smokin:
  7. Banditsteve

    Cargo Space weight limit

    I am a lumberjack and I am ok........................etc etc. There is a tedious link somewhere here! Lumberjack? Logs? Nope. Cant think of it :smokin:
  8. Banditsteve

    Cargo Space weight limit

    Is this the right room for an argument? Hehe. Did you get Monty Python on the tv over there? If not, that won't mean anything to you! :smokin:
  9. Banditsteve

    Cargo Space weight limit

    Shame I couldn't generate this many replies when I asked about my front springs. Maybe I should start an argument? That seems to get everybody talking............ Hehe :smokin:
  10. Banditsteve

    Spring Help...........

    Bump........... I tried to get some prices from JBA but he just wants to sell me some fully adjustable units for 1500 Dollars! Nice but out of my price range. Anybody else fitted CRD springs to a petrol or would anyone like to hazard a guess about how much higher it would sit? Or would I get...
  11. Banditsteve

    2002 Jeep Liberty Chimer

    Welcome to the family Ryan! I have got an 02 but don't have a "ding" when it stops. U pulling the handbrake on or opening the door before you stop or something? Don't even know if it "dings" if you do that but can't think of anything else. If it is anything to worry about it will tell you on...
  12. Banditsteve

    Something is wrong here...

    I would imagine it is just because its not on level ground. Or it wasn't on level ground last time you added oil to it? If you need to get some oil out it might be easier to take the oil filter off and empty the oil filter and then start it back up again till the oil light goes out so you know...
  13. Banditsteve

    How to remove the stock roof rails on a 2006 KJ?

    Welcome to the forum Paul. Nice to see another brit joining. I remember driving through Amersham every week about 15 years ago and as you drove down the valley there was a huge "Smilie" in the corn field at the bottom. It was when crop circles were all the rage. It's amazing what you can do...
  14. Banditsteve

    Spring help...............

    Cheers Mangate, I will have a look on their website and get some prices for shipping etc. Steve :smokin:
  15. Banditsteve

    check engine 171/172

    Blockage or contaminant in fuel injector? Stopping fuel getting through one minute and purging too much through the next? Or would that have its own code? Just chucking ideas about?
  16. Banditsteve

    Ordered my exhaust!

    Nice one Gaz! You will love it!! :smokin:
  17. Banditsteve

    Spring Help...........

    Thanx Guys, Guess it would be a waste of time and money going for the proper springs then. Might even sit lower if they supply shorter springs now!! And thanks Tommudd, yes I am aware that they will charge extra for doing the springs but winter is rapidly approaching now and not the weather for...
  18. Banditsteve

    Spring Help...........

    Hi Guys, Wonder if anyone can help me out. Just had a factory recall about the Upper ball joint and control arms on my 2002 Petrol Liberty. The long and short of it is that they are going to fit new UCA's free of charge so I thought about getting them to swap the springs while they are out. My...
  19. Banditsteve

    where did the lift FAQ go

    Why has Tony left?? Have I missed something?
  20. Banditsteve

    Spring help...............

    Hi Guys, Wonder if anyone can help me out. Just had a factory recall about the Upper ball joint and control arms on my 2002 Petrol Liberty. The long and short of it is that they are going to fit new UCA's free of charge so I thought about getting them to swap the springs while they are out. My...
View older results

Random media

Mounted CB radio
2858.jpg
ResizedImage 1387454207347
20210404_131711[1]
20130323 172351
8
2011 04 24 Liberty with new tires
Jeep and Bike
Ready to tear apart front suspension.

Latest posts

Members online

No members online now.
Total: 728 (members: 0, guests: 728)
Top