bmrrwolfe
Full Access Member
I have installed some leather power heated seats from a 06 KJ limited, but found under my seat, I do not have the wiring ran to my seat for the power & heat that most people have (in my case only have wiring for the seatbelt) Now I tried to trace the wiring back to how the factory wiring would go, but it looks too complex to try to get into the power distribution center. So I was going to just run power to the seats using a standard relay with a 12v source so they are only getting power when the ignition is on. But my concern was with the power draw that the heated seats take?
I know I will need to create the harness that runs from the drivers seat to the passenger seat, but there is a write up regarding that.
What gauge wiring would you recommend going with? It looks like the factory wiring is just a 16G?
Any other tips or pointers?
Thanks!
I know I will need to create the harness that runs from the drivers seat to the passenger seat, but there is a write up regarding that.
What gauge wiring would you recommend going with? It looks like the factory wiring is just a 16G?
Any other tips or pointers?
Thanks!