Did I miss anything

[seabass1858]

Mostly put together after cursing and throwing tools lol. I got my 32s 265/75/16 installed, I purchased some grabber at2s, 3ply sidewall 10ply tread I believe, Used 2 large sockets and the biggest c-clamp with a 1/2 in impact to replace the clevis bushings. installed 1.25in wheel spacers bedind my stock 16x7 steelies, jba 4.5s, yukon 4.10 gears, front trutrac, rear no-slip, rustys skids (engine and trans/tcase, ome 927/948, RRO topplate, rancho struts/rancho 4wd dakota shocks (kybs were defective), 3ring clevis, 2 extra rear isos, teraflex 3in bumpstops, 3 hocky pucks per side (keeps from rear rubbing), pinch welds pounded and plastic piece molded, roof rack and custom bumper with d-ring tabs, and reciever welded in which is in the making now but neighbors do not like my cutting and welding outside. Did I miss anything?

 

[cplchris]

Sounds like you got a good hamdle on everything...i have the same skids ill be putting on next week on my 2006 sport can you post pics so i know what the side tab on the tcase skid is supposed to mount to? And congrats on what sounds like a nice rig!! As for the neighbors...theyll live lol...mine have hated me since i was 13 running nitro rc cars and trucks up and down the street

 

[seabass1858]

I got the engine skid on now at the moment because I will be putting a shift kit on the 45rfe.

 

[J-Thompson]

Pics or it did not happen

 

[dude1116]

Mostly put together after cursing and throwing tools lol. I got my 32s 265/75/16 installed, I purchased some grabber at2s, 3ply sidewall 10ply tread I believe, Used 2 large sockets and the biggest c-clamp with a 1/2 in impact to replace the clevis bushings. installed 1.25in wheel spacers bedind my stock 16x7 steelies, jba 4.5s, yukon 4.10 gears, front trutrac, rear no-slip, rustys skids (engine and trans/tcase, ome 927/948, RRO topplate, rancho struts/rancho 4wd dakota shocks (kybs were defective), 3ring clevis, 2 extra rear isos, teraflex 3in bumpstops, 3 hocky pucks per side (keeps from rear rubbing), pinch welds pounded and plastic piece molded, roof rack and custom bumper with d-ring tabs, and reciever welded in which is in the making now but neighbors do not like my cutting and welding outside. Did I miss anything?

Yes! Swap out the IFS

Kidding everyone, kidding...