Latest activity
-
KKingpattycake replied to the thread Front differential help.No I pulled it apart and counted the front teeth. The front diff basically rotated up and the tube the cv axle slides in stayed in...
-
-
KJowner replied to the thread lifting back to stock height..They are an odd size spring, small and close wound with a high rate, I don't know of any other spring that fit except uprated ones built...
-
KJowner replied to the thread Front differential help.Are you sure both diffs are 4.10? A mix of ratios will do nasty things. When you say axle tube do you mean the shaft or the actual...
-
SStonedseabee805 replied to the thread lifting back to stock height..Not worried about handling I’m a desert rat and Cali lift always looks better fit me honestly wide up from and at most a 3 inch lift up...
-
SIt would be much nicer to drive if you lifted it level instead of like a powerboat.
-
PI want to qualify this review with the fact this is my first limited slip/locker. Well I have had the Detroit true trac for a while now...
-
PATF+4 for transfer case yes. Stripped not fun, there must be an easy out solution or take an old Allen socket & weld it on there to...
-
PWelcome what lift ? Tire sizes, wheels are you planning on maybe we can help For wheels 7 inch wide 4 inches of backspacing when lifted...
-
KI just re geared to 4.10 with a junk yard front end and the first time I put it in 4 low the passenger side axle tube twisted on me. Is...
-
Hey KJowner, thanks for all that detail – just seeing it now. A few days after my post above, I thought the better of it all, and went...
-
lfhoward reacted to u2slow's post in the thread Exhaust Manifold to Downpipe Gasket? 2005 Liberty Sport 3.7 with
Like.
It's been a year since I had mine apart. I don't remember. It was uneventful. I think it's just a flared pipe onto a chamfered outlet on... -
SSeamonster replied to the thread 235/70/16 Front + 265/75/16 Rear?.Hey KJowner, thanks for all that detail – just seeing it now. A few days after my post above, I thought the better of it all, and went...
-
KJowner replied to the thread Air flow does not go out in front position.You may have knocked a hose off the back of the controller but if you look on here you will find lots of information on broken...
-
KJowner replied to the thread Need help selling a NSG370.Can't you swap the tail housing or use it with a separate transfer box? I doubt many people on here will want a 2wd box, the NSG was...
