4.10 Re-gearing - 2025

[CheddarGau]

I wasn’t able to find a shop to install before being out of state, so can’t comment yet. Has anyone else used Yukon rear gears or have a better option? From what I had read, not much difference between Yukon, USA Standard etc..

I'm using usa standard gears in the rear, which are said to be a lower tier than Yukon. They are fine. Noise isn't bad, honestly pretty much the same as the factory gear noise. My pattern could be better, but I haven't had time to pull it apart and re-do it. The rears were 250 or 350 cad (dont remember). Rears super common. I believe Yukon sells the front gears based on when I was looking. Also a wrecking yard in Alberta has the complete 4.10 rear axle if anyone is looking. I ordered the front from them and just used the factory set up and swapped it in. I did install a torsen lsd in the front and a clutch lsd in the rear.

 

[mercdudecbr600]

I’ve been told by a few shops that the place of manufacture is the only real difference. Motive from Italy and revolution etc from Korea are the best bets but still 50/50 on noise production.

 

[mercdudecbr600]

I'm using usa standard gears in the rear, which are said to be a lower tier than Yukon. They are fine. Noise isn't bad, honestly pretty much the same as the factory gear noise. My pattern could be better, but I haven't had time to pull it apart and re-do it. The rears were 250 or 350 cad (dont remember). Rears super common. I believe Yukon sells the front gears based on when I was looking. Also a wrecking yard in Alberta has the complete 4.10 rear axle if anyone is looking. I ordered the front from them and just used the factory set up and swapped it in. I did install a torsen lsd in the front and a clutch lsd in the rear.

That’s good to hear - I’m on the hunt!

 

[Dovahkiin]

Salutations Everyone! Anyone know where to get those front 4.10 gears? I feel like I arrived to the party just a bit too late. I checked Amazon, EBay, Summit, RockAuto, JCE Racing and no luck yet. Some say they have back orders available, but I spoke with Yukon and they told me they source it out straight from Spicer, that they were 90% sure that they discontinued it. I searched under “YG D30HD-410L” and under “Dana Spicer 84006-5”; no cigar I feel I’m running out of options. I live in Puerto Rico so 4cyl KJs are nonexistent. Anyone here selling? Or could point me the right way? Much Appreciated

 

[CheddarGau]

Salutations Everyone! Anyone know where to get those front 4.10 gears? I feel like I arrived to the party just a bit too late. I checked Amazon, EBay, Summit, RockAuto, JCE Racing and no luck yet. Some say they have back orders available, but I spoke with Yukon and they told me they source it out straight from Spicer, that they were 90% sure that they discontinued it. I searched under “YG D30HD-410L” and under “Dana Spicer 84006-5”; no cigar I feel I’m running out of options. I live in Puerto Rico so 4cyl KJs are nonexistent. Anyone here selling? Or could point me the right way? Much Appreciated

I'll send you where I got them from a little later

 

[Dovahkiin]

I would Appreciate it very much! I’m so desperate I’m currently looking at a used parts resaler from Spain! Jaja an Odyssey