The Belafonte... My KJ

Discussion in 'Australia' started by cmohr, Apr 5, 2010.

  1. cmohr

    cmohr Full Access Member

    Messages:
    58
    Likes Received:
    0
    Joined:
    Oct 31, 2008
    Location:
    Australia , Downbottom.
    There been a lot of work go into this one. I had a 2004 V6 before as a project, all my learning has gone into this.

    Its a 2002, 2.5 TD CRD manual.

    It now has colour coded flares, grill, rear bumper and ARB front bar. 4-5 inches of lift, and is currently running 31/10.5/15s.

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  2. ptsb5a

    ptsb5a Full Access Member

    Messages:
    2,446
    Likes Received:
    1
    Joined:
    Mar 29, 2006
    Location:
    Northern Alberta, Canada
    Wow, nice Cherokee. You must divulge the lift secrets.

    And what brand of light are you running on the bumper? I'm using the stock Renegade Hellas on mine but I'm looking for something that will throw way more lumens downrange.
     
  3. cmohr

    cmohr Full Access Member

    Messages:
    58
    Likes Received:
    0
    Joined:
    Oct 31, 2008
    Location:
    Australia , Downbottom.
    The spotties are Narva 225's. They put out a very good light spread, and , have heaps of power.

    Lift actually came out of my old V6. I had a set of custom rear coils made, they can hold a full load in the back and keep it around 4in or so with the load. The front are OME 790's from about 4 years ago, but they have a little spacer under the coil perch to give the extra lift needed. I was running them with a ARB bar in the V6 and I reckon they have only dropped about 10mm or so now on the CRD.

    Heres a pic of the standard CRD front struts compared the my lift struts.

    [​IMG]
     
  4. ptsb5a

    ptsb5a Full Access Member

    Messages:
    2,446
    Likes Received:
    1
    Joined:
    Mar 29, 2006
    Location:
    Northern Alberta, Canada
    Thanks mate.