starting problem

[Logan Savage]

Installed new heads & timed engine today . With V6 at 12 on drivers side cam gear neither valve for # 1 cylinder is open . This is with the heads installed on the block . Exhaust lobe is a little past roller on rocker & intake lobe isn't quite to the roller on the rocker .

 

[J33Pfan]

Installed new heads & timed engine today . With V6 at 12 on drivers side cam gear neither valve for # 1 cylinder is open . This is with the heads installed on the block .

The service manual confirms this too!

 

[smackfest04]

Ok, that sounds about like my timing, it's between intake and exhaust, but both are closed, checked the dowels on cam gear and they are good to go, gonna check cam and crank sensor next, thanks guys