So a thing happend.

[Heavymetalduck]

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Not even joking my floor Mat caused this.
Got stuck on the gas on a gravel road taking a corner.

Was wondering on a scale 1-10 how bad is this and is it saveable. If so how much would it cost?

 

[KJowner]

I'd say saveable, cost depends on frame damage, you will need to check if the suspension mounts have been twisted, if they are OK then it shouldn't be too bad.

 

[rigid]

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Not even joking my floor Mat caused this.
Got stuck on the gas on a gravel road taking a corner.

Was wondering on a scale 1-10 how bad is this and is it saveable. If so how much would it cost?

Yes it is savable. It likely may require a trip to a frame machine to get squared back up. With the corner pushed out like that fender/hood alignment will be tough get correct. It would be light work on a machine if you can get it in. good luck

 

[LibertyTC]

Sorry to see this accident, hope insurance can help.
Dang loose driver's floor mat, I can see this happening.
I've always used WeatherTech floor liners,they are held in place.

You must be registered for see images attach

 

[jeepop]

Sorry!

 

[Heavymetalduck]

I'd say saveable, cost depends on frame damage, you will need to check if the suspension mounts have been twisted, if they are OK then it shouldn't be too bad.

Besides for that front corner everthing is fine. Even my alignment is still straight as an arrow.

I know because I had no choice but to drive back home in this condition.