-
-
Heavymetalduck replied to the thread Instrument cluster lights.So I found some that work I did have to bend the tabs a small bit though. https://a.co/d/1fjavBI I was experimenting with different... -
-
2002 limited A decent amount of my cluster lights are burnt out. i've been searching for led replacements but I cannot find the...
-
Heavymetalduck replied to the thread Flasher resistor mod.Not sure why I can't edit my post but I replaced with the 1.8 ohm in the amazon link. No longer heats up even after 10 mins.
-
Heavymetalduck replied to the thread Spinning nut problem.Use a nut splitter or even a chisel and hammer could work if your careful.
-
Heavymetalduck replied to the thread Replacing Front LCA.I'm not sure if you are lifting or not but if your not you can reuse the old lca and just press new bushings in. Either way I would do...
-
Heavymetalduck replied to the thread Flasher resistor mod.Do the kk liberty's have the same type flasher module?
-
Heavymetalduck replied to the thread Flasher resistor mod.I ended up using a 0.18ohm resistor and it no longer gets hot and doesn't even get warm.
-
Heavymetalduck replied to the thread Window regulator.I can't hear mine pretty sure the motor moved on to the afterlife I made sure both switches still work fine.
-
Heavymetalduck replied to the thread Windshield protector..Yea was think of using some cheap plastic film and just removing it after I'm done doing jeep things for the day.
-
Gary did the typical kj liberty thing and his window regulators are on life support. Except for the rear driver side that one just...
-
Is there any kind of premade windshield film for a kj? If not what's some good brands of film?
-
Heavymetalduck replied to the thread Key fob issue.The build sheet I got doesn't list any of these.
-
-
Heavymetalduck replied to the thread Key fob issue.I have that exact one and I've followed everything it said for probably an hour trying to get it to work but gary still refuses.
-
My 02 kj (Gary) refuses to learn any new key fobs. I've tried but everytime it just doesn't. I've even used a dorman obd programmer and...
-
-
Loading…
-
Loading…
