Skid Plate Part Numbers

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

UKKJ

Full Access Member
Joined
Sep 25, 2005
Messages
111
Reaction score
0
Location
Newcastle Upon Tyne, UK
Ian

I don't know what you are used too!!

My last car was a Cooper S with xenons..

The 'flood' effect of the Jeep is comparable, just the long range is not as good...need some nice spots
 

Old Navy

New Member
Joined
Oct 24, 2005
Messages
44
Reaction score
0
Location
SwampEast MO
If they ever make an HIR bulb in the duel element 9007 HB5 then we will be ok with the stock head lights in the US.
 

kj lad

Full Access Member
Joined
Nov 20, 2004
Messages
414
Reaction score
0
Location
North east England
I have a Vectra company car and I pefer those lights (particularly high beam). The Jeep's are ok, but when comparing them to more modern light clusters I think there's serious room for improvement......

Ian
 

UKKJ

Full Access Member
Joined
Sep 25, 2005
Messages
111
Reaction score
0
Location
Newcastle Upon Tyne, UK
Back to skid plates

Here goes skid one 82209026 Front Suspension

You must be registered for see images

You must be registered for see images

You must be registered for see images

You must be registered for see images

You must be registered for see images


Will post some pics installed, but it is pretty straightforward!!

Mark
 

Old Navy

New Member
Joined
Oct 24, 2005
Messages
44
Reaction score
0
Location
SwampEast MO
Wish I could remember for sure, but it seem different looking compared to the CRD front skid plate.
 

UKKJ

Full Access Member
Joined
Sep 25, 2005
Messages
111
Reaction score
0
Location
Newcastle Upon Tyne, UK
ON,

I haven't offered it up yet!

This is the part number from the Jeep dealer so hopefully OK!

There is another part that does a similar job, the one above that could be obselete

Cheers
Mark
 
Top