REAR LOCKER FOR 06 KJ CRD C8.25 WITH C-CLIPS
- Thread starter jorgecfs
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Here's some selectable lockers:
ox-usa.com
There's nothing CRD-specific about your rear axle. I also believe that by 2006 the ring gear bolts are revised to 10mm (from 3/8") so you may need to drill out the holes.
Chrysler 8.25 Archives - OX Offroad
Chrysler 8.25 OX Lockers are designed for gear ratios of 2.73 and numerically higher, and factory spline counts of 27 and 29. Differentials from 1997 and on will be 29 spline, please ensure correct spline count when ordering.
ox-usa.com
There's nothing CRD-specific about your rear axle. I also believe that by 2006 the ring gear bolts are revised to 10mm (from 3/8") so you may need to drill out the holes.
