OTIS install problems!

[joshy0077]

Hey all,

This is my first time posting on this forum, but you guys seem to be the ones to ask. I recently bought an OTIS comp. off of ebay, and just got my temp sensor installed. I thought there may be a connector that goes to the datalink so I ordered a part from Chrysler parts direct and they basically sent me a datalink with a bunch of unconnected wires...so I'm either going to sell that or return it if possible. Anyways, trying to go off the posted instructions, and the recommendations of the person I bought the unit off of, I plugged the wires into the datalink...I did not splice them...will this work?! Also, on the recommendations of the ebayer, I wrapped the ignition control wire around a fuse and plugging it back in (tried #29 and #32) hoping to get some life out of the comp...however, I got nothing. I attached some pictures of what I did...can anyone tell me what I did wrong? I was afraid to splice the wires on the DL because I just bought the jeep CPO and was afraid to void my 90 day bumper to bumper...but it looks to me as though the wire connectors on the datalink should allow wires to be plugged in? Let me know if I'm wrong.

http://community.webshots.com/photo/404389552/404390363rAdIty

http://community.webshots.com/photo/404389552/404390628CFfJcn

http://community.webshots.com/photo/404389552/404390849vhUWfe

http://community.webshots.com/photo/404389552/404391409AdqTXm


Jon Edit: fixed links, took off IMG tags..and left as links..

 

[Marlon_JB2]

I thought my EVIC was dead too...

Until I pushed the "Step" button. It could have possibly been turned off when you received it. This may seem dumb, but you have tried pushing the buttons, right?

 

[joshy0077]

Yeah I tried pushing the buttons, I'm pretty sure I pushed all of them...but I may have missed the step button. I will try that if I don't get any more help. Thanks for the quick reply!