No Air in 2 or 3

[03Renegade]

On my 2003 Liberty the air will work on 1 and 3 but not on 2 or 4???
What do I need to replace, I don't want to take it to local dealership, any help would be great.

2003 Jeep Liberty Renegade
95k miles
AT

Thanks,
-Chris

 

[valvestem]

On my 2003 Liberty the air will work on 1 and 3 but not on 2 or 4???
What do I need to replace, I don't want to take it to local dealership, any help would be great.

2003 Jeep Liberty Renegade
95k miles
AT

Thanks,
-Chris

Do a search here for heater blower resistor replacement. That may be what it is, although they usually fail in 1, 2, & 3 speeds, and 4 is the only one that will work.

 

[03Renegade]

Do a search here for heater blower resistor replacement. That may be what it is, although they usually fail in 1, 2, & 3 speeds, and 4 is the only one that will work.

Yeah I saw that post, didn't know if that was it or not?

 

[twack]

yup easy and cheap to replace.

 

[TigerClaws]

X2 on the Heater Blower Resistor. You might want to check the Heater Fan motor as well to see if its still good for the long run... Mine went out 1 month aside form each other on my Pontiac Grand Am... Those resistors always end up replaced no matter the makes and models... I guess it depends on how much you use the heater so the motor also shortens its life at the same time ...

 

[TAHOE]

http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=47156
Our Libby doesn't have 1 or 2 right now

 

[03Renegade]

Thanks for the reply TAHOE, but I already replaced it with the cheap one, wish I would have seen the sebring one early, well the next time it goes out I will replace it with the good one.

Thanks to all that replied.

-Chris