Libby finally Lifted

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

2-old

New Member
Joined
Mar 2, 2009
Messages
17
Reaction score
0
Location
Henderson, NV
Took it to 4 Wheel Parts, and they had no problems with it. Only $130.00 more than Big "O", but it included alignment.

BDS Lift kit
Front: Before lift. Front 18" After 21"
Bilstein F4-BE5-D916-HO Front struts.
Terraflex extended front bumps stops.
2 Conduit nuts each side.

Rear: Before lift. Driver side 17 3/4 " Pass. 18" After Driver 20 3/4" Pass 21"
2 Isolators each side.
2 Hockey pucks each side.

Before lift
You must be registered for see images attach

You must be registered for see images attach


After Lift
You must be registered for see images attach

You must be registered for see images attach
 
Last edited:

resistance

Full Access Member
Joined
Dec 16, 2009
Messages
156
Reaction score
0
Location
Turkiye
Cool, it looks good. X2 about man tires tho.

BTW, I also have the 2" BDS kit installed. But many people here think the rear coils of this kit do not belong to the KJ:confused: Could you please post a picture of your rear coils? Here's what mine look like, totally different from the stock coil shape:
You must be registered for see images attach
 

2-old

New Member
Joined
Mar 2, 2009
Messages
17
Reaction score
0
Location
Henderson, NV
Cool, it looks good. X2 about man tires tho.

BTW, I also have the 2" BDS kit installed. But many people here think the rear coils of this kit do not belong to the KJ:confused: Could you please post a picture of your rear coils? Here's what mine look like, totally different from the stock coil shape:
You must be registered for see images attach

As soon as I can get under it to take a picture of it I will.
 

2-old

New Member
Joined
Mar 2, 2009
Messages
17
Reaction score
0
Location
Henderson, NV
Looks good...I bet it rides a lot better now too?

Had it out off-roading on the 22nd, and it really handles and rides nice. Much better than the old suspension. I can drive faster on the rough roads, and not bottom out as much, and don't have to worry about scraping the skid plates like I used to.
 

2-old

New Member
Joined
Mar 2, 2009
Messages
17
Reaction score
0
Location
Henderson, NV
Cool, it looks good. X2 about man tires tho.

BTW, I also have the 2" BDS kit installed. But many people here think the rear coils of this kit do not belong to the KJ:confused: Could you please post a picture of your rear coils? Here's what mine look like, totally different from the stock coil shape:
You must be registered for see images attach

Sorry it took so long, but I just got around to getting the pictures.
 

Attachments

  • spring1.jpg
    spring1.jpg
    94.3 KB · Views: 23
  • spring2.jpg
    spring2.jpg
    95.2 KB · Views: 23
Top