LBJ part number for 2007 KJ

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Cardhu

Full Access Member
Joined
Aug 29, 2011
Messages
685
Reaction score
5
Location
Great White North
Was looking to order Rear upper iso and serpentine belt to save on brokerage and shipping and thought about getting LBJ.

Was looking on Rock auto for Lower BJ and the Moog part number for 2007 is different then previous models.

for 02 to 05 MOOG Part # K3199

06-07 MOOG Part # K80767

What changed? The LCA are the same, right?

Is it just the change when the went to wheel speed sensors in the axle bearing hub assembly with the ESP module? Or did they change after being plagued with the LBJ recall? The Timkin hub is the same part number for all years.
 

Cardhu

Full Access Member
Joined
Aug 29, 2011
Messages
685
Reaction score
5
Location
Great White North
Cool, thanks. Just seemed suspicious as I couldn't figure out why they switched.

The other ones are the problem solvers as well and look reasonably identical zerk included, i'm sure they used the same picture regardless.
 
Top