Are the knuckles on the 2002 the same as on 06? Or are they different, I have someone with an 06 knuckle that they are going to sell me because mine is bent; but im not sure if they are they same or not
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Not iron or steel anymore. ALUMINUM. Even the SRT-10 Ram uses aluminum knuckles to hold the bearing, hang 15" rotors and 4 piston calipers. It's one of the ways manufacturers found over the years to save weight.I wouldn't buy that story. Something like a steering knuckle doesn't bend. It may crack or break, but it doesn't bend. It's iron, not steel.
The KJ's knuckles are iron,the KK get aluminum.Knuckles are the same part number for both years as per their respective parts manuals.
Not iron or steel anymore. ALUMINUM. Even the SRT-10 Ram uses aluminum knuckles to hold the bearing, hang 15" rotors and 4 piston calipers. It's one of the ways manufacturers found over the years to save weight.
Tie rods do not effect camber,can effect wobble at speeds though.Okay, a friend suggested to look at the tie rods, does anyone have a picture I can reference a normal tie rod from? Is this a serious safety issue? How much are new tie rods/ends?
Tie rods do not effect camber,can effect wobble at speeds though.