just a wee bit pissed

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

butcher

New Member
Joined
Sep 29, 2016
Messages
21
Reaction score
0
Location
Ontario
Well... spent the day stripping out the dash to replace the blend door actuator, to still not have it work!
Just a wee bit pissed right now. That's a lot of work for nothing. (Restraining from cussing)
 

teeje

Full Access Member
Joined
May 5, 2014
Messages
733
Reaction score
5
Location
Toledo
Well... spent the day stripping out the dash to replace the blend door actuator, to still not have it work!
Just a wee bit pissed right now. That's a lot of work for nothing. (Restraining from cussing)
You'll get it down to a science haha. Last time I pulled it to do the heater core (mind you I was pissed because the heater core and engine were new) got it out the first time in 45 minutes. Had it all back together and radio wouldn't work thought I pulled a wire so I pulled it again. Only Theo find it was a blow fuse

Sent from my SM-G935P using Tapatalk
 

profdlp

Fired
Joined
May 21, 2013
Messages
5,850
Reaction score
1,849
Location
Westlake, Ohio
Hang in there - you'll get it. :grd:

You will also hold the distinction of being the only member here to have had their dash apart twice, so there's that, too. :winner_third_h4h:
 

butcher

New Member
Joined
Sep 29, 2016
Messages
21
Reaction score
0
Location
Ontario
with so little time off of work, I'd rather be out driving it hunting for bush chickens then wrenching on it, it will be very cold here very soon though, I need heat, and it will be to late to be hunting by the time I get it figured out URGH!
"buy a jeep they said, It will be fun they said".... so far not fun
 
Top