jompigrande
New Member
first at all excuseme for my very bad english.....
As you may know windows goes down on the worst moment, there is a piece with a wrong factory design that simply breaks, so you can buy http://www.steigerperformance.com/dif.cgi?SP13005, or here in mexico there is another replacement part that its very cheap and fix the problem forever too:
Needed tools:
* Couple of screwdrivers
* wrench
* grease
* paper towel and windex
* swiss army knife
First at all remove this two screws:
Now remove the pannel with the help of a flat screwdriver:
go without fear, you will here a noise when the clips opens
Detach door lock handle wire and rear view mirrors regulartor cables
take apart speaker (3 screws)
now its time to take apart the door plastic cover, that its glued with a kind of black gum that you must take care that not get dust so you can reuse it:
now you have the door ready to work:
you need to detach all screws from motor and rail:
open this clip:
detach the motor connector:
take apart the clips that holds the support to the window:
Now you may take aparte first the rail, and then the motor:
thats it, the whole system out:
now you may take aparte the broken piece, to do it you may bend this two tabs that holds this piece:
this is an image from the old one and the replacement:
screw the regulator wire to the new piece:
now run the tutorial in backwards to assemble it again, thats all, hope that this guide help someone else.
Regards, jose!
As you may know windows goes down on the worst moment, there is a piece with a wrong factory design that simply breaks, so you can buy http://www.steigerperformance.com/dif.cgi?SP13005, or here in mexico there is another replacement part that its very cheap and fix the problem forever too:
You must be registered for see images attach
Needed tools:
You must be registered for see images attach
* Couple of screwdrivers
* wrench
* grease
* paper towel and windex
* swiss army knife
First at all remove this two screws:
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Now remove the pannel with the help of a flat screwdriver:
You must be registered for see images attach
You must be registered for see images attach
go without fear, you will here a noise when the clips opens
You must be registered for see images attach
Detach door lock handle wire and rear view mirrors regulartor cables
You must be registered for see images attach
You must be registered for see images attach
take apart speaker (3 screws)
You must be registered for see images attach
now its time to take apart the door plastic cover, that its glued with a kind of black gum that you must take care that not get dust so you can reuse it:
You must be registered for see images attach
You must be registered for see images attach
now you have the door ready to work:
You must be registered for see images attach
you need to detach all screws from motor and rail:
You must be registered for see images attach
You must be registered for see images attach
open this clip:
You must be registered for see images attach
detach the motor connector:
You must be registered for see images attach
take apart the clips that holds the support to the window:
You must be registered for see images attach
Now you may take aparte first the rail, and then the motor:
You must be registered for see images attach
thats it, the whole system out:
You must be registered for see images attach
now you may take aparte the broken piece, to do it you may bend this two tabs that holds this piece:
You must be registered for see images attach
this is an image from the old one and the replacement:
You must be registered for see images attach
screw the regulator wire to the new piece:
You must be registered for see images attach
now run the tutorial in backwards to assemble it again, thats all, hope that this guide help someone else.
Regards, jose!