Diggerfreek
Moderator
Tools Needed
APPLY THE EMERGENCY BRAKE
First start by removing the rear converter panel from the rear of the center console
Next direct your attention to the shifter/4x4 cover panel
Once the rear of the panel is popped up, pull the panel towards the rear of the jeep
remove screw A
B
And C...There are two screws inside the center console
Once this is done, unzip the brake boot and lift the console from the rear and position like this
When done, installation is the reverse
You must be registered for see images attach
APPLY THE EMERGENCY BRAKE
First start by removing the rear converter panel from the rear of the center console
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Next direct your attention to the shifter/4x4 cover panel
You must be registered for see images attach
You must be registered for see images attach
Once the rear of the panel is popped up, pull the panel towards the rear of the jeep
You must be registered for see images attach
remove screw A
You must be registered for see images attach
B
You must be registered for see images attach
And C...There are two screws inside the center console
Once this is done, unzip the brake boot and lift the console from the rear and position like this
You must be registered for see images attach
When done, installation is the reverse
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach