Help

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

nick25crd

Member
Joined
Oct 7, 2007
Messages
97
Reaction score
0
Location
Thessaloniki,Greece
My 2.5 crd isn't strong anymore.it can't accelerate as it could and can't reach even more 2800 rpm with the 5th gear (it is manual).
What could be?it isn't problem with the hoses.
 

bugnout

Full Access Member
Joined
Jul 13, 2006
Messages
166
Reaction score
0
Location
Illinois
Are you seeing the Check Engine Light CEL? Can you pull codes from the ECM? That would help to diagnose the problem.
 

goatkj

New Member
Joined
Dec 2, 2010
Messages
11
Reaction score
0
Location
Sacramento, CA
I'll bet journeymanjim is right. For my own, it started fine one morning, idled fine, but was absolutely gutless when I drove (to the point of being dangerous on the road!!!). Turned out to be a pinched vacuum line to the turbocharger.
 

flman

Full Access Member
Joined
Aug 28, 2009
Messages
74
Reaction score
0
Location
jyjhbkbu
DOES ANYONE KNOW IF CODE:p0846 2/4 Pressure Switch Sense Circuit (41TE, 42LE) CAN
LEAD OUR CRDS IN LIMP-MODE(SAFE-MODE)

Being the ****** is a vital part of the drive train, I would not be surprised if it can put you in LHM?
 
Top