cold air intake

[seabass1858]

did you ever grenade a front diff?

 

[tjkj2002]

did you ever grenade a front diff?

No,broke a CV joint though.

You must be registered for see images

The nice thing with the DTT was I had to hold the brakes just a little to "fool it" into locking,which the side effect was slowing me down on obsticals and learning how to drive a little better.With the ARB(and HP44) I rarely have to ever engage the front locker from learning on the rocks with the DTT.

 

[ridenby]

Don't think that posi front and rear are going to save your wife or anyone else from stupid.

 

[Ry' N Jen]

The only thing that ***** is you have to engage the rear locker 1st before you can engage the front,sometimes I just want the front locked.

X2
There's got to be a way around that somehow.

 

[J-Thompson]

X2
There's got to be a way around that somehow.

There is
I want to say I read where some one simply wired the
solenoids independent of each other
Remember the solenoids are the exact same thing as
a relay for fog lights
The ARB harness supplies the front "relay" from the
power side of the rear "relay"
It is kind of like having aux. back up lights wired to
your aux. front lights and the reverse lights
1 switch turns on front lights relay that also
supplies power to the rear
the reverse lights on your jeep act as the second switch
so when you put your jeep in reverse the coil gets power
and the lights come on

 

[Ry' N Jen]

There is
I want to say I read where some one simply wired the
solenoids independent of each other
Remember the solenoids are the exact same thing as
a relay for fog lights
The ARB harness supplies the front "relay" from the
power side of the rear "relay"
It is kind of like having aux. back up lights wired to
your aux. front lights and the reverse lights
1 switch turns on front lights relay that also
supplies power to the rear
the reverse lights on your jeep act as the second switch
so when you put your jeep in reverse the coil gets power
and the lights come on

Gotcha.
I didn't do the install myself, too F***ed up physically.
I'll have to pull a copy of the install manual and then pop
the HVAC consul off to get to the wiring...
Gotta wait for my spine to calm down.

Thanks J