Cant help my luck!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

farhopian

New Member
Joined
Jan 8, 2013
Messages
16
Reaction score
0
Location
fairhope alabama
Hello everyone! I just replaced my radiator today due to the crack in the plastic top drivers side. Upon refilling the coolant i saw a constant drip about center front of the jeep. When i got under with a flashlight i saw it was coming from right up against the water pump pully. I dont know what to make of that. Never saw a leak before replacing the rad. Any thoughts?
 

rjkj2005

Full Access Member
Joined
Feb 25, 2016
Messages
380
Reaction score
0
Location
US
Coincidence time to change the water pump.

Sent from my XT1585 using Tapatalk
 

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,450
Reaction score
3,656
Location
Southeastern Ohio
Thats why when I did the radiator on the 03 and then the 05 they both got new thermostats/hoses and water pumps
 

HoosierJeeper

Gold Supporter/Admin
Staff member
Administrator
Joined
Jan 20, 2009
Messages
20,886
Reaction score
313
Location
Western WI
Yep, they usually go with each other or damn near. Mine I think I replaced the WP then a week later I noticed a drip from the radiator.
 

libordemise

Full Access Member
Joined
Jun 20, 2017
Messages
132
Reaction score
0
Location
CA
Yep, they usually go with each other or damn near. Mine I think I replaced the WP then a week later I noticed a drip from the radiator.
Me too exactly.. Right after the pump, although i had one of the cheapo Chinese rads so it was doomed anyway

Sent from my LG-K210 using Tapatalk
 

farhopian

New Member
Joined
Jan 8, 2013
Messages
16
Reaction score
0
Location
fairhope alabama
Thanks yall! I thought it was wierd for it to happen in the same day. Replaced the wp this morning and going to pick up the stat tomorrow. Appreciate the feedback. Glad it wasnt something dumb i did as i am just a weekend warrior and not a professional wrench turner!:happy160:
 

farhopian

New Member
Joined
Jan 8, 2013
Messages
16
Reaction score
0
Location
fairhope alabama
By the way how do you burp the air out of the system. I put the heat on and ran it with the cap off. Should i have done something else? I dont have a 8mm hex to open the bleeder valve.
 
Top