Search results

Big breaker bar and 250 pounds of body pulling and they came off no issue....

If it really can't be used as a hitch, there is no way the lawyers would have let them go forward with installing hitches. You are correct that it would open them up to tons of liability. What happens if you sell the Jeep with the "fake hitch" and the next person doesn't get the memo. It's a...

El cheapo pads squeal on these Libertys. You need a good quality ceramic pad.

Yep...5-10 minute job ...in the Florida weather it has been a life saver.

I haven't posted a whole lot on this forum, but thought I would comment here. I find it interesting that this post brought freddybrugama to the forum, because this is the same post that also brought me here. In my case it was a napkin that had evidently pushed out the back of the glove box and...

Check out: https://customerconnect.custhelp.com/app/jeep/eqlisting_detail/ For mine it lists "AM/FM Cass/CD Radio w/Changer Ctrl"...not sure if that is specific enough to get you down to a model # or not.

No front diff...2wd. Will check rack and pinion bushings and retorque everything. Yes, alignment was done. Will realign in 2-3 weeks when springs settle

So just replaced a bunch of stuff and am still getting a clunk going over bumps (sounds like right front, but could be more center). It's a ton better than it was before, but want to find this one last noise. Here's what I just replaced: Upper Control Arms All LCA bushings Lower ball...

Just found a shop that will remove old and push in new for $20 a piece. Thanks for all the advice guys. Will be doing this job when I get back from vacation. Avg Joe..yeah I will replace the rear bushings too while I am at it...

1. Turn off the engine 2. Erase factory test codes by pressing the two outside buttons. Release when the light in overhead begins to flash. 3. Place your regular garage remote within 1 inch of the buttons and push an hold both the regular remote and the button you want to program. 4. Once...

Thanks for the response Bob...good info. I'm not looking to get more resale value...I'm looking to stop the noises I hear while I drive around :). It's annoying the crap out of me and I can't stand it anymore.

All you guys seem to like JBA stuff ...what about the LCAs they sell? Lower front left control arm | J.B.A.

I need 2 years ....this is 2wd ...no offroad...just need a decent ride...will the Moog LCAs for $180 each get me that?

Bushing or bearing driver won't cut it? The service manual just shows using a threaded forcing screw assembly.

Honestly I'm looking to get 2 years out of this Liberty. The Moog bushing should give me 2 years, shouldn't they? If I do the bushing myself, I save $280 bucks...I'm going to be doing shocks, struts, coils, LCA ball joints, and UCAs too ...$280 bucks will help. Can you be more specific on the...

fronts btw...

I've seen some threads on here where people say that in order to replace the bushings in the LCA you should just buy the whole LCA. Why? Entire LCA is $180. I can get Moog bushings (all 3 for the LCA) for $40. What am I missing here?

I will check this out...thanks! Another update...been trying things to replicate noises and if I stand on the brakes and give it gas (in forward or reverse) I can here it creak and then clunk/pop. definitely sounds like something around the wheels moving in and out of place and...

Sorry...this is not 4wd...so no front drive shaft, right?

Procedures to test/inspect?