Search results

I was told the exact thing at work too! You never know. Sent from my iPhone using Tapatalk

Hemi time! It's a 1500 Express

Traded mine in :(. Got a 2013 Ram 1500 truck Saturday night. Needed more room for camping and larger for trailer towing. Will probably get another jeep down the road and build a trail rig that doesn't need to be a daily driver. I may be selling 2 brand new tow hooks I took off with hardware...

K3199 moog Do not get the auto zone joints!!!! The grease fittings will not clear the cv axle. Only get the moog part. Ask how I know this :( Sent from my iPhone using Tapatalk

Check and see if the dust cover inside the spring moves at all or rattles. If it does then tighten more. I chased a squeak since I lifted my 02 and found the top nut needed a few turns to tighten down further after driving about 20k miles. I'm impatient and hit with an impact til tight ( my way...

I aimed the fitting to the front and was able to grease with no problem.

Replaced the POS auto-zone ball joint with a Moog tonight. When something is made right it actually works :). While apart, I pulled the right shock down and tightened the top nut and it seems to have taken care of my squeak that's been bugging me since my lift was installed. I have to return the...

Replaced my right lower ball joint again.........and fixed the right front shock noise that's been there since I installed my lift.

Yeah I know better! They come out the top, tried a 90 fitting no good either. Tried even grinding a fitting down and could not clear. Funny thing is, the bag the joint came in ( in the box) has the moog p/n on it. Gonna take the one back, order from Rock Auto and then try to return the other...

I started to install new lower ball joints on my '02 last night. Replaced the right side with no problems until reinstalling the axle. With the grease fitting on, I cannot install the axle through the hub. I had to grease then remove the fitting and plug to be able to reinstall the axle. Before...

So I've been up in Kentucky trying out my new jeep tent the last few days........ :) Sent from my iPhone using Tapatalk

I agree on the dynapros. They ride great , not too noisy and wear really well. I have them back on mine right now (245/70r16) and I drive about 90 miles a day. I also have a set of good year duratracs (245/75r16) on other wheels. Both are great tires just using the Hankooks again as I get about...

Also made a cb antenna mount off the spare tire carrier. I made it to hold a magnet mount Wilson antenna. Screwed a flat steel plate to a piece of steel angle and used the top mounting holes of the tire carrier to mount to. Just have to pulll the whip back to clear the glass when opening...

Installed an OE gas tank skid today. Now I have a full set of skid plates on my '02. Cost me only $108 not the best out there by far but the price was right for now. If it gets banged up bad I'll install a better one later! So far all new OEM jeep skids cost me only $204. Now time to make a...

That's my setup with ome coils. I think they are soft. I should have spent the few extra $ for better although I am overall happy with them. The front seems fine but way too soft for my liking in the back especially with towing a trailer. The rear squats way too low loaded. Trail wise they seem...

Grounding the the hitch itself would require a good clean connection to the body. Unless the bolts had clean metal underneath or a clean metal to metal contact between the hitch and body it would probably be a poor ground. Mine has two ground points. One behind the right 1/4 trim where my...

Yeah. The powder coating should ground it good....... Sent from my iPhone using Tapatalk

Not today but last weekend got to go up to Tennessee. Sent from my iPhone using Tapatalk

Guess I need some gears now! Sent from my iPhone using Tapatalk

Put the dynapros back on for now. Went from 15.2 avg to just over 18.5 highway. Sent from my iPhone using Tapatalk