Search results

  1. P

    Harmonic balancer installer for 2003 2.4L

    I had ordered an installer tool for the harmonic balancer, but it seems the parts it comes with for jeeps do not work on the 2003 2.4L, due to the threads on the crank shaft starting down inside a bit, instead of at the face. I found the "official" tool, but it's $100 when you take into account...
  2. P

    Anyone have a source for a camshaft tone wheel on a 2003 Liberty 2.4L?

    I have been dealing with cam sensor issues for a while now, and finally broke down and took the timing belt and stuff off to remove the tone wheel. The "small" dings were worse than I thought they were. I have punded out the dings, and will refine it a bit more, but would rather find a good...
  3. P

    2003 Liberty 2.4L - Is the intake manifold one piece or two?

    I was going to remove the upper intake manifold so I could remove the wiring harness for injectors, cam and crank sensors. When I looked in the service manual to see how to remove the upper manifold, it talks about removing some bolts, but there are no bolts on mine. The picture in the manual...
  4. P

    Can you replace the clutch safety switch without removing the clutch master cylinder and stuff?

    Can the cluch safey switch be replaced without removing the master cylinder? Jeep seems to sell the clutch hydraulic unit with the switch on it, but a lot of the aftermarket ones don't seem to include it, and look like you just attach it to the road coming from the pedal. I see the switch can...
  5. P

    2003 2.4L Liberty. Lost clutch pedal today. Assume line blew out. How hard is it to replace clutch cylinders?

    Lost clutch pedal while driving home today. Was able to keep going down the highway. Had a bid of a hiccup when I came to stop signs near home, but was able to nurse by by shutting off the car, shifting into first, and then starting it while in four wheel low to get it through the two...
  6. P

    Chasing down cause of P1391 on 2003 2.4l Jeep Liberty

    Earlier in the year, I was having starting trouble that ended up being the result of AZ giving me the wrong starter multiple times. While diagnosing it at the time, I replaced to CAM Position Sensor, and ever since, I have had a P1391 code showing up. I assumed at first that I had done the gap...
  7. P

    2003 Liberty not starting... again. [SOLVED]

    Some of you may remember my saga over the winter, in which AZ gave me the wrong starter twice. Well, today the Liberty decided it didn't want to start again. Started fine first thing in the morning, started fine around lunch time, and then when I went to leave a site, it wouldn't start...
  8. P

    2003 Liberty 2.4L - Is it possible I have the wrong starter? (SOLVED)

    I have a couple other threads here from me chasing down a starting problem. It turns the engine for a split second, and then disengages and just spins. I thought I had it narrowed down to the battery cables, but I just replaced them, and the problem persists. Yesterday, I disconnected the...
  9. P

    How does my flywheel look?

    I am still diagnosing a starter issue. I took the starter off today, and recorded a video of the flywheel while rotatin the engine. There is one spot where it looks chewed up at the front of the teeth, but the starter should engage beyound that area. There has been a few times when the...
  10. P

    JeepCables battery cable installation help!? (SOLVED)

    After determing my battery cables were shot, I ordered a set of cables from jeepcables.com. Has anyone here installed their kit on a Jeep KJ? I am not sure what a good mounting location is for the fuse, and I am not sure how to make the PDC connections work since they don't bend down so the...
  11. P

    Starter problem or something else? (It's two separate issues)

    I have a 2003 Liberty 2.4L 5 speed manual that I bought last year. Since I've had it, there has always been an issue that sometimes I would turn the key, and the engine would crank very slowly, but if I just left off the key, and turned it again, it would start fine. Not sure if related or...

Random media

hello
2006 Liberty Sport 4x2
new jeep
IMG 0547
2011 10 12 17.02.28
What an ARB Bumper and Warn M8000 look like not yet installed.
1190.jpg
1227151627b
rims

Latest posts

Members online

No members online now.
Total: 465 (members: 0, guests: 465)
Top