Search results
-
S
Subwoofer Box, Work in progress
just test fit the box before continuing... box was actually able to slide right in from the rear without removing the seat (nice plus!) Seat belt sensor bracket has to be bent upward for clearance... front end of box is 3/4" longer than desired, and height of box is about 1/4" inch taller than...- ShadowedXistence
- Post #11
- Forum: KJ General Discussion
-
S
Subwoofer Box, Work in progress
I have already removed the jack from under the rear seat... Pull the cover off of the bottom of the rear seat... weld two steel flat bars across the outside seat frames same distance apart as the mounting points on the amplifier. and attach the amps to these with bolts threaded from bottom of...- ShadowedXistence
- Post #9
- Forum: KJ General Discussion
-
S
Subwoofer Box, Work in progress
It's actually a REALLY small table... the thinner end that is offset from the bottom as noticed in picture 2 is the front... the height is 5.5... the bottom width at it's widest is 9 in the rear, and 7 in the front... top width is 11.5 in the rear and 8.5 in the front... length is 19.5... angles...- ShadowedXistence
- Post #7
- Forum: KJ General Discussion
-
S
Subwoofer Box, Work in progress
Designed to fit under the front seats, with an 8" pioneer shallow mount sub in each... refuse to waste precious cargo space. Would have done more, but waiting for the liquid nail to dry... Reinforced inside and outside joints with liquid nail... still need to trim a little, joint the top edge...- ShadowedXistence
- Thread
- Replies: 18
- Forum: KJ General Discussion
-
S
"cylinder 5 misfire"
I just had the same problem on Cylinder 6 about 2 weeks ago! Common causes: spark plugs, ignition coil, fuel injector... mine turned out to be the fuel injector... and yes I ran fuel injector cleaner throughout the car. Switch out ignition coil with another cylinder. Check to see if code...- ShadowedXistence
- Post #8
- Forum: KJ General Discussion
-
S
Ouch - T-Boned...
Looking at your second picture, it appears that your driver side wheel is straight while the front side of the passenger tire is angled outward... Take a look at it...- ShadowedXistence
- Post #12
- Forum: KJ General Discussion
-
S
Rear bearing? or something else
tjkj. How does one go about determining if it is the axle bearing without removing it? What symptoms or characteristics should I be noticing?- ShadowedXistence
- Post #9
- Forum: KJ General Discussion
-
S
Rear bearing? or something else
Drove it around some today, and had no sound... So I got thinking... Yesterday I drove it to walmart... NO SOUND... it wasn't until I left walmart with about 100lbs of groceries in the back that I started getting the sound... Wondering if there is a part on the rear end that would be more...- ShadowedXistence
- Post #5
- Forum: KJ General Discussion
-
S
Rear bearing? or something else
No vibration just the metal flapping like noise... my thoughts have been leaning more towards the universal joint however rather than the bearing... Go figure though... spend a few days fixing the front of the car, and the same day I get that taken care of, something else starts up... lol- ShadowedXistence
- Post #3
- Forum: KJ General Discussion
-
S
Australia - Rear bumper
Exactly... I thought about relocating my spare to the roof and felt that the european bumper had a much nicer appeal to it without the tire on the rear end... if you look at pictures of the "Liberator," you'll see what I mean... HOWEVER, I decided to check things out first before doing such...- ShadowedXistence
- Post #8
- Forum: KJ General Discussion
-
S
Gauges
I would have jumped on that too budke... but hey looks like you beat me too it... it's all you man... lol- ShadowedXistence
- Post #5
- Forum: KJ General Discussion
-
S
Rear bearing? or something else
Awful sound coming from rear of vehicle sounds more to be on the passenger side. Sounds like a card in the spoke of a bicycle wheel but metal to metal sound. Can't always here it... and after hitting a good bump or pothole, it usually goes away for a few seconds or minutes... sound gets...- ShadowedXistence
- Thread
- Replies: 8
- Forum: KJ General Discussion
-
S
P0306 Cylinder 6 Misfire Problems
Problem solved... replaced fuel injector and new rings all around... drove a little rough for the first 5 miles... now it drives super smooth... I kept saying earlier that I never felt any stuttering... but now that it's fixed it definately feels smoother... but anyway fixed one problem...- ShadowedXistence
- Post #17
- Forum: KJ General Discussion
-
S
Australia - Rear bumper
it's a direct dealer part... the jeep liberty is the jeep cherokee overseas... doesn't necessarily have to be from australia, that's just where I found one. The rear bumper on these have no license plate bracket, making the whole back of it flat... I found a couple on the australian and uk ebay...- ShadowedXistence
- Post #3
- Forum: KJ General Discussion
-
S
P0306 Cylinder 6 Misfire Problems
No stutter while driving. Slight stutter in idol for VERY short period of time only when vehicle has been sitting for more than a day. Checked combustion... Checks out good solenoid test was good, ohm test on fuel injector was good... there seem to be no problems... just a stupid light...- ShadowedXistence
- Post #16
- Forum: KJ General Discussion
-
S
P0306 Cylinder 6 Misfire Problems
fuel injector and housing are good... I don't think it's the o2 sensor. Ignition coil replaced, spark plugs replaced. Don't know what to do... thought of pulling off fuel rail and putting new rings on fuel injectors... Just don't know what to do.- ShadowedXistence
- Post #13
- Forum: KJ General Discussion
-
S
Australia - Rear bumper
does anyone know how to go about buying a factory replacement rear bumper from australia... Any info would be great. Thanks- ShadowedXistence
- Thread
- Replies: 7
- Forum: KJ General Discussion
-
S
Are renegade fender flares swapable?
Yes you can definately put the renegade fender flares on your limited. They attach with the same hardware and in the same spots as your originals. However, on my search for these fender flares I've only been able to find 02-04 models, but nothing newer. You'll probably have to order a direct...- ShadowedXistence
- Post #2
- Forum: KJ General Discussion
-
S
oh jeez.. an odd noise
I had this same problem and it turned out to be a bearing in one of my pulleys- ShadowedXistence
- Post #2
- Forum: KJ General Discussion
-
S
P0306 Cylinder 6 Misfire Problems
Sure enough... light is back on... hadn't driven it for about a day and a half, slight stutter backing out and went away after pulling forward. Took off on it a little bit, and the light came right back on... Light only seems to want to come on after it has been sitting for a little while...- ShadowedXistence
- Post #12
- Forum: KJ General Discussion
