Search results

  1. J

    Oil light came on

    Thanks everyone for helping. My oil level is good . I will replace this sending unit first. I thought it might be the oil pump.
  2. J

    Oil light came on

    This morning i turned on my kj and didnt warm up as i usually do . When i took off after about 30sec . Warm up my oil light illuminated then turned off. I kept driving a little more then it flashed more time. What could it be? Thanks
  3. J

    Infinity speakers

    Thanks . I will try them out and post once i get them installed .
  4. J

    Infinity speakers

    Hello has anyone used the infinity 6532ix cross reference speakers. I cannot find the 6032CF that most people have. I wanted to know if i could still do the same set up with the factory amplifier attached to the speakers at the door. . Any suggestions on some front speakers would help. I just...
  5. J

    P0420 code and 02 sensors question:

    i would try to change out the “gas cap”.Sometimes the computer will give a reading due to less pressure in the system which in result Could cause a p0420 in theory thinking the 02 sensors are adjusting Accordingly. If not the gas cap then maybe another underlining issue that could cause the...
  6. J

    Bouncy rear after lift install.

    Sorry to keep bugging but i found these shocks and wanted to see if these are the ones for the rear on my kj. They are mopar brand #52106928AB. Could i use these with ome 948 as a combo for rear?
  7. J

    Bouncy rear after lift install.

    So i would still need another set of springs for the rear ? Like ome 948 with just bilstein shocks.
  8. J

    Bouncy rear after lift install.

    Would if i go with the Monroe's #58649 for the rear and for the front ome springs and bilsteins? Since its going to lift the front 2.5 inches the monroes should even out the height in the back?
  9. J

    Bouncy rear after lift install.

    Im looking for a rear shock/spring upgrade. What rear shocks can we use for the rear then?
  10. J

    Transmission flush RLE

    So it came out to 504$ with the new pan they suggested to change . It would have been cheaper if i didn’t get the pan. Maybe 400$ . But if your pan is old there gunna tell you. They might have to order to if not in stock. But well worth it . I have a year warranty for leaks
  11. J

    Transmission flush RLE

    Thanks for the tips. I got the flush done and it drives way better. Lots of power what a difference.
  12. J

    Transmission flush RLE

    Im getting my auto trans flushed by the dealer. Ive had the KJ V6 for 5 months now and want to see how the results will be. I have 144,000 miles i dont think the tranny has ever been serviced . Should i have gotten a fluid exchange or Just go with the flush?
  13. J

    Rear control arms/differential shaft ?

    So i lifted up the rear with my jack and put it on drive . Only the driver side wheel rotates and wobbles side to side . The right side passenger does not rotate unless i give it gas. Any suggestions?
  14. J

    Rear control arms/differential shaft ?

    Hello im having trouble with my KJ rear end . Its doing the (hula) also i see as im driving my rear wheels are driving side to side . I didn't realize it was the bad until i noticed the side to side movement . Is it my lower control arms and differential shaft? how would I check each one? I...
  15. J

    How to troubleshoot car not turning on?

    Sometimes the drive belt and tensioner will be the problem if its worn and stretched. doesn’t pull enough amperage to keep the battery stable.
  16. J

    Lower control arm bolts stuck

    Finally got those bolts off. I used a carbide blade and it work . Thanks all for helping
  17. J

    Lower control arm bolts stuck

    Help, Im having trouble getting the front lower control arm off. The cam bolts seem to be stuck with the inside of the bushings . Any suggestions. I tried a reciprocating saw but it doesn’t seem to work.
  18. J

    Clunk coming from the back, when shifting

    I have the same issue but it only happens in the morning/next day . Once i take off when it goes from 1st to second gear it clunks hard unless i help it by giving it more throttle to slowly shift into gear. After that its all warmed up an no issues for the rest of the day. I also tried doing a...
  19. J

    Jeep lose power with the AC ON

    I have the same problem the other day with the a/c on and i was getting on the fwy. Very little power as if my jeep was starving for air. Anything that could help?
  20. J

    Wiring dual led lights on front bumper

    The packaging didn’t come with a specific set up for dual light. But the switch i got for it is the switch that came with the kit for general set up. Thats why i would have to run a separate wire for the amber lights or should i tap it to ground ? To use with the double throw switch. . Thanks

Random media

IMG 3027
IMAG1045
IMG 1100
myjeep3
image
2 15 10 in Snow 018
2003 Jeep Liberty
20140822 142703
First flag -west republic army . Aka bonnet blue.

Latest posts

Members online

No members online now.
Total: 532 (members: 0, guests: 532)
Top