Search results

  1. J

    Whirring sound from frontend

    Revisiting this as I finally got the sound fixed. After swearing the sound had to be the front hub assembly or the inner axel I finally bought new tires and all the noise went away. I cannot believe those Hankook DynaPro ATM's could generate all that noise. I had not wanted to replace them even...
  2. J

    AC stopped functioning

    The AC Compressor has been replaced as it was my assumption the Mag Coil was bad and the compressor that was in the vehicle did not have a replacement mag coil part. The system has been charged. The clutch is still not engaging. I am not sure I heard the tech correctly but he said something...
  3. J

    AC stopped functioning

    Mag coil stopped engaging so I assumed it was bad and ordered a new compressor and all. Mechanic has the new one but he is not getting power or the right power to the mag coil to have it engage. This started with the system not turning on until after the Liberty was driven a few miles, then...
  4. J

    Radio sounds like crap - options

    So doing some reading it appears the front "Infinity" speakers which I have, have an onboard amp and this makes all the difference in the stock radios.
  5. J

    Radio sounds like crap - options

    Found a low mileage 07 Sport which the base RBQ radio. The sound quality of the system sucks compared to my 02 Limited. Opinions on is it the radio or speakers that makes the difference between the two? Staying stock what options are there for upgrading the radio, just the 6 CD changer radio...
  6. J

    Liberty tried to leave me on the side of the road.

    Cam Shaft Sensor and Crank Shaft Sensor replacement, unsure which was the fix but both are right near each other and might as well change them out at the same time. I eventually started throwing codes which helped figure this out, off hand I'm sorry I don't recall the codes but it was pretty...
  7. J

    Error Code P0320

    The Idle control was replaced because I bought it months ago after getting the rebuilt engine in and it was rough idling, I just had never put it in. I only use Mopar sensors. I'll use third party parts for things like pads, filters, etc but never a sensor however the crankshaft sensors are no...
  8. J

    2002 overheating & misfire code

    Not sure on the misfire but as to the coolant I had an issue where more than one mechanic said it looked like the engine did not get flushed correctly at the manufacturer. When I replaced the radiator it was full of fiber looking crap, like the stuff you find in coolant sealers however I am the...
  9. J

    Best source for REMAN engine?

    I'm with you in that my Liberty is in great shape inside and out, has the 45rfe Transmission and I just don't like all the computer crap, engine shutoff at stops and everything else with new cars so doing an engine replacement vs. a new car, car payment, easy choice. I got mine from Accurate...
  10. J

    Error Code P0320

    Well I went ahead and pulled the battery cables, left the car door open while I also changed the Idle Air Control unit and the code is gone. Upside, Jeep idle is much smoother. Drove it on secondary roads, max speed 50mph, for just under 20 miles and it's smooth with no codes showing or coming...
  11. J

    Error Code P0320

    Jeep Liberty 02 stalled out twice on the way to work, no codes then on the way back, about the same place, say 10 minutes into driving it did it again. Each time the Tach went nuts, 0-5000 and it felt like the engine just shut off although I still had power sterring and brakes. The second time...
  12. J

    Liberty tried to leave me on the side of the road.

    So checked straps, great shape and grounded. Drove home and actually in the same darn place it stalled out again. This time the Engine light stayed on and threw a code, P0320. Looks like I need the Camshaft and Crankshaft sensors from what I find online.
  13. J

    Liberty tried to leave me on the side of the road.

    It's the 2002. As it is currently running, everything sounds fine. At the time I was on the side of the road I am not sure I could hear much of anything other than traffic. I used a cheap, wireless ODB reader and my phone with a couple of different reader apps, none of them showed anything. It...
  14. J

    Liberty tried to leave me on the side of the road.

    It's the 2002. As it is currently running, everything sounds fine. At the time I was on the side of the road I am not sure I could hear much of anything other than traffic. I used a cheap, wireless ODB reader and my phone with a couple of different reader apps, none of them showed anything. It...
  15. J

    Liberty tried to leave me on the side of the road.

    ok, going to work this AM I was doing 65 then it felt like the engine cut out but not completely. I lost 99% of my power and by the time I pulled over the engine was off. The Tach was going all over the place from 0 to 7000 RPM but the engine was not racing, it was very quiet as in idle or less...
  16. J

    Security Lug Nut, what is this thing?

    You are just looking at the standard Sport, steel wheel. https://ibb.co/Dk2287L
  17. J

    Security Lug Nut, what is this thing?

    The 2007 I just picked up has a security lug nut on the spare but it's not the standard one found on the Jeep Liberty, the McGard ones. Anyone know what this is?
  18. J

    Mirror wiring same for heated and non-heated?

    On the 07 Liberty I recently picked up the right hand mirror doesn't move very well so thought I'd order a used replacement. This is on a Sport so doesn't have the heated option but the donor part I am looking at is heated. Is the wiring harness the same on these, just the "heating" wire...
  19. J

    07 actuator problem

    Location and what am I looking for?
  20. J

    profdlp's 2007 Liberty Project

    Late to this thread and reading through it and caught this tip. I do the same, large suction cup with a large nub on it, stays in the Jeep all the time as those windows regulators SUCK and will go out with no notice.
Top