Search results

  1. JeepinSteve

    Fuel Pump Recommendation for a 2004 KJ 3.7

    Hello Jeremy. Could you include the link for the Delco you purchased. Thanks.
  2. JeepinSteve

    Fuel Pump Recommendation for a 2004 KJ 3.7

    Unfortunately I can't find a mopar pump. The dealer says they are discontinued. Anything you see on ebay, etc..I'm assuming in fake. If anyone knows of a way to get a genuine mopar pump, please let me know.
  3. JeepinSteve

    Fuel Pump Recommendation for a 2004 KJ 3.7

    Hello All. Does anyone have any recommendations on a fuel pump for a 2004 3.7. I've been looking at the pumps on Rockauto, but based on some of the posts on this website, it seems like they can be hit or miss? Anyone have any experience using a Walbro fuel pump (Not sure if they make one...
  4. JeepinSteve

    Help me choose a tire size (TJ MOAB Rims)

    The wheels are 8" Pro Comp (51 Series Rock Crawler) Flat black with 3.75" backspacing. The model # is 51-5865F. There are no problems with clearing the brake calipers. Probably around 2 inches clearance in the rear and 1/2" to 3/4" in the front. As Tom said, the stock backspacing is 5". The...
  5. JeepinSteve

    Help me choose a tire size (TJ MOAB Rims)

    I have Cooper Discoverer STT Pro 30x9.5 15 mud tires on 8" Pro Comp wheels with an OME 2.5 lift, and in my opinion they do look just a little to small, but like you, I didn't want to do a re-gear. Based on the specs from Tire Rack, my tires are a tad larger than the Toyo Open Country...
  6. JeepinSteve

    Winch mount on stock bumper.

    Thanks. Yes, agreed. I would like to connect the two square tubes. After I get the end caps welded in, that will be my next upgrade to the mount.
  7. JeepinSteve

    Winch mount on stock bumper.

    So I decided to build a winch mount retaining my stock bumper. I used two 2x2 1/4" tubes and a universal winch mount from Harbor Freight which are welded and bolted together with grade 8 bolts for added strength. To mount it, I did something very similar to what Nate from Dirt Lifestyle did, I...
  8. JeepinSteve

    Is the stock stereo interchangeable between 2002-2007 KJ's?

    Thanks for the info. How much would you want for the stereo? I probably wouldn't have a use for the the Sat adapter. Thanks.
  9. JeepinSteve

    Is the stock stereo interchangeable between 2002-2007 KJ's?

    Hello All. I'm planning on replacing my aftermarket JVC stereo in my 2004 KJ with a factory stereo. I will probably pick one up at a junkyard or on Ebay. My question is, will a stereo out of any year KJ work in my 2004 KJ? Although the stereo's have minor differences in appearance, I noticed...
  10. JeepinSteve

    8.25 DTT Carrier Install Specs –Ring Bolts, Preload, Backlash, Bearing Caps

    Hello All. I’m installing a Detroit TrueTrac in the rear 8.25 on my 2004 KJ. I’m having a difficult time finding the torque specs for the carrier. Unfortunately the Chilton manual doesn’t have any information about installing a carrier. After looking around on the web, it seems that the torque...
  11. JeepinSteve

    Detroit Lockers with Selectrac

    Hello Tom. I will be installing a DTT in the rear of my Liberty in the next couple of weeks. Any recommendation on what viscosity gear oil to run in the DTT? This is a 5 speed manual 4x4 that see moderate trails from time to time. Thanks.
  12. JeepinSteve

    OME Suspension Lift and Tires

    Hello Gerry, I just recently installed the same suspension setup as you are planning on getting (OME front and rear) in my 2004. I was also thinking of doing the upper control arms, but decided based on the advice from the experienced people on this forum and the place that I purchased the OME...
  13. JeepinSteve

    Winch mount on stock bumper.

    Here's a good video of Nate from Dirt Lifestyle building a full bumper for a Liberty.
  14. JeepinSteve

    Detroit Truetrac - Speed Sensor

    This is good to know. Thanks for the info Tom.
  15. JeepinSteve

    Detroit Truetrac - Speed Sensor

    Hello All. I'm planning on installing a Detroit Truetrac (DTL-912A553) in the rear (8.25) of my 2004 Liberty. I noticed it has a sensor on the top of the axle housing which I'm assuming is a speed sensor. Will installing a Truetrac create any issues for this sensor? Thanks.
  16. JeepinSteve

    Best posi or locker for '06 KJ

    Hello Pat. Did you ever end up installing any lockers or Posi? If so, what did you end up going with? I'm looking to install one of the two in the rear 8.25, but not sure what I'm going to go with.
  17. JeepinSteve

    Parasitic draw

    Is the cigarette lighter part of the lighting system?
  18. JeepinSteve

    06/03 3.7 engine swap throwing p0016 and p0344

    Here is the link from TwoBobsKJ https://www.jeepkj.com/threads/engine-swap-overview.53270/
  19. JeepinSteve

    Engine swap

    Here is the link from TwoBobsKJ https://www.jeepkj.com/threads/engine-swap-overview.53270/
  20. JeepinSteve

    OME 132 vs. OME 132L

    I contacted All Js. Your correct, they don't make the 132L anymore. Tom, is there a Bilstein (or any other brand) long travel rear shock you could reccomend in place of the 132L that you think would work well with an out of the box OME lift on an 2004 KJ. Thanks in advance. Steve
View older results

Random media

IMAG0029
IMAG0117
Lights inside grille
After Second Wash
Renegade light bar
left side (400x225)
rutómetro septiembre
IMG 80553148977657
stock.

Latest posts

Members online

No members online now.
Total: 242 (members: 2, guests: 240)
Top