EGR CEL solution

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

A

adklettke

New Member
Joined
Sep 16, 2024
Messages
25
Reaction score
6
I have been reading the threads and most are years old regarding the issue. I've performed the delete and would like to eliminate the cel. Is a tune the only solution at this time, besides putting black tape over the light? I understand that the SEGR kit/mod fooled the system but are no longer available as a unit, kit or schematics. I have no problem with a tune but I am in Mexico and I am quite satisfied with the stock power.
I already had the Jeep seized by the Aduana and got it back after six plus months and about 40,000pesos in lawyer and mordida. I am in the process of importing it into Mexico and that has cost another 35,500pesos. So I'm not cheap but this Jeep is already gold plated and I would prefer an economical solution.
 
KJowner

KJowner

Full Access Member
Joined
Oct 20, 2022
Messages
2,240
Reaction score
1,382
Location
Uk
The other option is to contact a guy called Yeti on Facebook, he does online car tuning, and was very active with CRD's on Lost Jeeps forum.
 
P

petermac

New Member
Joined
Oct 7, 2021
Messages
1
Reaction score
1
adklettke said:
I have been reading the threads and most are years old regarding the issue. I've performed the delete and would like to eliminate the cel. Is a tune the only solution at this time, besides putting black tape over the light? I understand that the SEGR kit/mod fooled the system but are no longer available as a unit, kit or schematics. I have no problem with a tune but I am in Mexico and I am quite satisfied with the stock power.
I already had the Jeep seized by the Aduana and got it back after six plus months and about 40,000pesos in lawyer and mordida. I am in the process of importing it into Mexico and that has cost another 35,500pesos. So I'm not cheap but this Jeep is already gold plated and I would prefer an economical solution.
Click to expand...
I live in Mexico and have a 2006 Liberty card legally imported that has segr bypass, that I would like to sell.
 
A

adklettke

New Member
Joined
Sep 16, 2024
Messages
25
Reaction score
6
Here are some pictures when I bought it. Just dealing with a dead battery and alternator failure. Bought the tune gadget and when I get it, I'll contact Yeti again for the EGR delete tune.
 

Attachments

  • Jeep 1.jpg
    Jeep 1.jpg
    86.1 KB · Views: 1
  • Jeep 2.jpg
    Jeep 2.jpg
    49.6 KB · Views: 1
  • Jeep 3.jpg
    Jeep 3.jpg
    57.4 KB · Views: 1
DadOSix

DadOSix

Well-Known Member
KJ Supporting Member
Joined
May 20, 2020
Messages
970
Reaction score
603
Location
Cumberland, MD.
T

Turbo4Tim

New Member
Joined
Dec 29, 2025
Messages
15
Reaction score
8
Hey, I just re-joined up again here. What happened to all the info stuff for the CRD's?
I'm the guy that designed the SEGR module. It's the EGR delete without removing (or you could) the EGR but fooling the ECM.
I still got all the plans if anybody is interested. Just PM me or let's get the CRD Info section back.
I have a bunch of part numbers, and accessory part numbers.
 
A

adklettke

New Member
Joined
Sep 16, 2024
Messages
25
Reaction score
6
Hi, I am very interested in your SEGR module design. I am happy with the power of the jeep and just want the EGR CEL gone. I am hesitant to flashing the computer
 
T

Turbo4Tim

New Member
Joined
Dec 29, 2025
Messages
15
Reaction score
8
There is no need to flash the ECM. Many others have done this with success. I designed it so that if one had to take it back to the dealer for warranty work, a simple jumper plug can be inserted, and everything is back to stock. All parts can be retained.
I'm trying to see if there is a place here on the forum where information specific to the CRD. I have collected other information that others could benefit by, such as: Turbo hoses, Bosch Part numbers, Mann Pro Vent, Lift pump that fits in the fuel tank, etc.
If there is an interest, let's see how many want this.
 
A

adklettke

New Member
Joined
Sep 16, 2024
Messages
25
Reaction score
6
Turbo4Tim said:
There is no need to flash the ECM. Many others have done this with success. I designed it so that if one had to take it back to the dealer for warranty work, a simple jumper plug can be inserted, and everything is back to stock. All parts can be retained.
I'm trying to see if there is a place here on the forum where information specific to the CRD. I have collected other information that others could benefit by, such as: Turbo hoses, Bosch Part numbers, Mann Pro Vent, Lift pump that fits in the fuel tank, etc.
If there is an interest, let's see how many want this.
Click to expand...
You are a wealth of information. There is a CRD folder and possibly a files tab where info cand be stored.
 
T

Turbo4Tim

New Member
Joined
Dec 29, 2025
Messages
15
Reaction score
8
Thanks. The problem is if I post here, as topics come in, this thread will get pushed further and further down, then after a short while, nobody will be able to find the info.
When I was with this forum about 14 years ago, there was a dedicated section where reference info was kept. I see that is gone now. Just wondering if the members want something like that.
The type of info in that section was for part numbers, mods like the Mann Pro Vent for the oil breather, the SEGR module, Bosch part numbers for say the Lift Pump that fits in the fuel tank. Do we want this?
 
A

adklettke

New Member
Joined
Sep 16, 2024
Messages
25
Reaction score
6
I see what you're saying. It should be under the folder "Resources" but I can't figure out how to add to that folder. Maybe there is a moderator that can explain how to add the information. What you want to contribute is very valuable to the group.
I also couldn't figure out how to personal message someone. My email is [email protected] if you can send it to me.
 
A

adklettke

New Member
Joined
Sep 16, 2024
Messages
25
Reaction score
6
Turbo4Tim said:
Thanks. The problem is if I post here, as topics come in, this thread will get pushed further and further down, then after a short while, nobody will be able to find the info.
When I was with this forum about 14 years ago, there was a dedicated section where reference info was kept. I see that is gone now. Just wondering if the members want something like that.
The type of info in that section was for part numbers, mods like the Mann Pro Vent for the oil breather, the SEGR module, Bosch part numbers for say the Lift Pump that fits in the fuel tank. Do we want this?
Click to expand...
Ok, figured it out. Click the "Resources" tab at the top of the group. The Resources page will appear, and then click the small orange window on the right of the screen that reads "add resource" (just like the post reply). Then a window will appear that begins "Post resource in...", click "example category" just below and another window will open with all the fields to complete and provisions for uploading files. Simple and clear as mud.
 
You must log in or register to reply here.

Similar threads

M
EGR Delete without tune, what happens?
Replies
2
Views
7K
lorraine 54
L
LibertyChicago
EGR valve solenoid--where to buy?
Replies
4
Views
2K
France 16 Olivier
France 16 Olivier
K
CEL Stays On With P0101 MAF Code
Replies
2
Views
2K
KJowner
KJowner
L
Jeek KJ 2.8 CRD Limited - Advice Needed
Replies
13
Views
4K
jamesbarnes808
J
L
Jeep KJ Howling/Droning Sound
Replies
8
Views
2K
KJowner
KJowner

Random media

San Pedro Martir Baja California
IMG 0080
Still shiny
Right after getting my new tires
Tearing it up!
052
5088.jpg
Fun on the Ice
Geo tracker 3 in suspension lift on 30 in tires it was a fun little rig fit on all the 4 wheeler trails

Latest posts

Members online

Total: 546 (members: 1, guests: 545)
Top