Recent content by mooku21

I'm not sure if this has ever been posted, but I found a video that will help a lot if you need to do work in your transmission....in my case replacing the NSS/SPEED SENSOR. The guy explains everything so clearly and makes it look easy. Here is the link to it...

Another day and seem like there's another problem on my 04 liberty. I was able to start my jeep in park after re assembling everything today but after the 3rd time starting it after turning it off it wouldn't start unless in neutral so everything is pretty much piinting at the neutral safty...

Thanks you I'm definitely saving this for future use!

Thanks... I should have asked about this a long time ago it would have been really helpful. Luckily I only tightens those bolt to 50ft.lb which is 5lb more and it didn't break anything.

Do you know what the torque for the bolts are? Both the bolt fornt and the 3 rear that goes into the diff?

I just reinstalled my front differential on my 04 liberty but was not able to find the torque spec for the 15mm bolt on the left side of the front differential and don't want to over tightens them. 3 are nut and bolt for the front left mount and the other 3 are bolted into the diff of the left...

I was able to remove the front diffrential today off a 06 liberty limited for my 04 liberty sport. Both v6 with 3.73 gear. But after removing it I notice that on the hallow hole part for the intermediate has a stamp that say 06 K1 50763 Dana. While on mine say 03 K2 50763 Dana. I also took the...

I have until Monday, maybe I should just take both off and grab a few pictures. But buckauto is only asking $15 for the mount so it not a expensive. But save me form having to crawl under 2 liberty in a yard full of gravel, broken glass and gunk

I'm able to get the whole front diff with the cv included for $185. The 06 liberty seemed to have the best diff with no leak. It'll save me time not having to disassemble 2 vehicle if that different looking mount will work. I mean it looks the same as the original one instead of having to insert...

Yes both the engine and gear rotation (3.73) matched. Something happened on my way to work that caused the whole vehicle to rattle and sake. After jacking it up and removed the passenger cv. Both passenger cv and intermediate shaft was rounded out. I was able to find a shaft and cv for it at the...

Hopefully someone can answer this for me. I've spent hours looking through Google to see if I can get an answer, but pretty much I went to the junk yard today needing to replace a front diff and to find a new mount aswell. I found a 04 and 06 liberty with the part I needed but the only problem...