Recent content by joshtazz

  1. J

    what kind of paint???

    so i decided to go with krylon fusion and some clear coat...it took awhile but i got a good result i think.....just wonder if it will last. and the dif color in its just a glare...
  2. J

    what kind of paint???

    ok so i want to paint my door black and i dont know what kind of method and or paint type to use???? and i just want to paint the tan.....thanks
  3. J

    stalls and dies

    well i couldn't get the valve of today (was in a hurry),so im going to try tommorow. But here is video of what its doing...http://www.youtube.com/watch?v=UZJIxyrZ-Cg ...also if you notice it does it before i come to a complete stop....im just stumped
  4. J

    stalls and dies

    Yes it sti does it in nuetral and ill try the iac...thanks for replys
  5. J

    stalls and dies

    there is but its just 0500 for speed sensor( the speedometer doesn't work but im working on that) really its only when im coming to stop or slow down from any speed above 20 mph.
  6. J

    stalls and dies

    recently my 2002 3.7 liberty has been acting wierd. whenever i go to slow down and press on the brakes, the rpms will go all the way to around 200 or 400 rmps. sometimes it will rev back without be pressing anything, but most the time it will just die. it starts back up just fine to. thanks
  7. J

    need advice

    cause the inner trim of the console ( the part that sorta supports the radio) is attached to the whole center of the dash.
  8. J

    need advice

    k thanks and its because i need to route some wires behind thier for gps and other goodies. thnks alot.
  9. J

    need advice

    this
  10. J

    need advice

    hello i am installing an aftermarket radio and i was wondering if thier was any easy way i can get the middle section of the dash out. where the two vents are. i have the bezel off. just need to get the center out. thnks
  11. J

    help. Error codes

    k thank u from what i got since im getting both codes then one of those probably is bad thanks for the help,
  12. J

    help. Error codes

    so i have the error codes p0500 and p0700. i have already replaced the speed sensor on top of the differential. along with the wires. the light went off and speedometer started working f0 like two minutes then i got the p0700 code. I know there are two more sensors on the trany and i was...
  13. J

    Stuck

    what tires would u guys recommend after a frankenlift would be installed
  14. J

    Stuck

    ya they are some great pics and those tires do suck. ha ya i was extremely scared because it whipped three times before i hit the ditch.
  15. J

    Stuck

    good advice im saving up to get the frankenlift and some bigger tires. (can't wait)
Top