Recent content by CCKJ03

Any one selling used Armor? I am interested in skid plates and rock rails, OEM will do.

I talked to another place and the guy told me $150 $200 Max for both sides depending on what else he finds when he takes the fenderwell out. Has anyone else had to get there shock mounts repaired/welded? How did it happen? How did the repair come out?

Stopped in to a body shop. They told me the same thing; should be able to sand it down and weld it up. They told me that it should not be to exspensive either...under $500 for both for sure. They would have to take a good look at they said to make sure.

I had squeaking noise was coming from the rear suspension. As I was looking into it, I noticed the right rear shock mount had a crack in the back out corner. Looked at the right side and it had a crack developing. Has anyone experienced this? Moreover, if so what should I do to prevent/ fix this...

I had squeaking noise was coming from the rear suspension. As I was looking into it, I noticed the right rear shock mount had a crack in the back out corner. Looked at the right side and it had a crack developing. Has anyone experienced this? Moreover, if so what should I do to prevent/ fix this...

Thanks for the info. I am having RRO send me some new 12mm sleeves. I am going to probally add some washers to take up any slack.

Is it normal to have no threads showing when you torque down your the nuts on the studs for the mount plate? I know the OTT plate provided will shorten the distance you have for running down the nuts. I just wanted to know if this is normal and has anyone experienced problems? In addition, my...

I was hoping maybe if someone replaced their UCAs with new UCAs, maybe they would have the old set hanging around. You should be able to take off and install on another UCA boot if it is good condition. This is the situation I was hoping to fall into.

Does anyone know where I can get an Upper Control Arm Boot? Ripped it during lift install. help!.gif

Is it normal to have no threads of the stud showing past the nut for the top mount on a RRO combo kit lift?[/img]

Spent the afternoon trying to get a couple more flat washers in on the top rear shock mounts. And the squeak kind of went away. I only hear it on bigger bumps now. Things are looking up \:D/ ...will see how it does in the am. If anyone has any other good ideas I'll take them.

I used the 12mm sleeves that RRO recommended...and I added a couple off 7/16's flat washers to take up the play. I have also lubed and anti seized everything in sight and still I have the squeak. I am at a lost for solutions.

I have had the lift on for about 2 weeks now. I thought that it needed to settle as well...then I got the alignment and it seemed to settle even more. However, I think it has settled as much as it can. Thanks for the input! I am going to install those extra insulator as soon as I get them.

I had 245/70/16's on my Liberty when it was stock and I experienced no rubbing during normal driving and while doing some mild off roading.

Thanks for the advise I will check this out. What do you think about adding an extra top spring insulator? Marlon_JBT liked the idea of adding the extra insulator...I am trying to get a few thoughts on this before I go with it.