Recent content by bobsgym

I have an 03 liberty with the Automatic 42RLE Transmission. I just had it serviced because my mechanic said the pan was really rusty and thin. The problem I have is when I am up and over 30 mph and slow back down it down shifts with a slight thud. My mechanic says that the computer needs to...

Mine is an 03. I have had quotes of $250 to $412 to do it. Most are about in the $400 range. I may have to go with $250 depending on how long it takes. How much stuff will need to take off to get good access. Never had to do one before.

How compicated and about how long does it take to change the high pressure and return hoses for the power steering pump? Thanks for all the answers on my other questions. This site kicks much ass.

Thanks guys. I just put in new plugs last month and a new air filter and only getting low 15 mpgs. Hope I can get atleast 18 to 20 hwy. Going to run her at 70 mph one way and 65 mph back and see how much of a difference it makes.

I am going to be taking a trip next month and I have never driven long distance in my Jeep yet and I was wondering at what speed and rpm does everybody get the best milage in their Jeeps. I have a stock 03 3.7 engine 3.73 gears with an automatic ******.

I just has an alingment done on my 03 liberty sport. It still pulls slightly to the left. The shop said that it was in specs and if he adjusted anything more I would have bad tire wear. I asked if anything was broken or worn out and needed to be replaced but he said it all looks good. I replaced...

What causes the cupping of tires?

Had a friend do one side so I could watch and I did the other side. Now I know how. Thanks for all of your guys input this site is the best.

I didn't know if I needed box wrenches or some kind of hex wrench.

I know I read it on here somewhere but I can't find it.

What size and kind on tools do you need to replace the pads and rotors on a '03 liberty?

Thanks for all the input guys.

Couple of questions. 1. When you change gears in the rear end do you also need to change them in the front? 2. I am thinking of putting in a lift but not for off road purpose, just for more clearance in the snow. Would a Jeep Liberty 3" Rough Country Lift Kits w/ Shocks work? As I said it will...

I saw a kj pic of guy who put eye lids on his head lights. anyone know where to buy them or make them. I think they are really cool looking. Makes it look it's mad.

Do 03 Liberty Sports have a upper windshield molding? I bought mine used and it didn't have one and has some rust bubbles in the gap. I am getting the rust taken care of next week. I was just wondering because some of the Liberty pics I have seen don't look like they have any moldings just gaps.