Peter Arseneault
New Member
- Joined
- Apr 2, 2019
- Messages
- 3
- Reaction score
- 1
Hi All,
After changing out rear calipers, rubber brake hoses, pads and rotors on a 2003 KJ I have very soft brakes. I have no leaks anywhere. I double checked everything was seated and tight. I did bleed them out (roughly put a quart of DOT 3) through and am getting clean fluid with no air at all bleeding through. I bled all 4 wheels. If the vehicle is off and I pump up the brakes I get a hard pedal, as soon as I start the vehicle the pedal drops to the floor with the slightest pressure. Anyone else had an issue with this or have any suggestions? TIA
After changing out rear calipers, rubber brake hoses, pads and rotors on a 2003 KJ I have very soft brakes. I have no leaks anywhere. I double checked everything was seated and tight. I did bleed them out (roughly put a quart of DOT 3) through and am getting clean fluid with no air at all bleeding through. I bled all 4 wheels. If the vehicle is off and I pump up the brakes I get a hard pedal, as soon as I start the vehicle the pedal drops to the floor with the slightest pressure. Anyone else had an issue with this or have any suggestions? TIA