Who all makes teflon/stainless steel overbraid brake lines?

[Ry' N Jen]

So far the only ones I have found are from Jeepin by Al.
Anyone else make them?
I'm not opposed to assembling my own set as I don't care about a DOT sticker
'cause we don't have vehicle safety inspections here.

 

[Paul M]

Try these:

Pre-Assembled Stainless Steel Braided Race Car Brake Lines

Stainless Steel Braided PTFE Hose, SS Braided PTFE Hose, SS Tube Stub Assemblies, Heat Pump Hose, Fan Coil Hookup, Power Trim Hose, Biodiesel, Brake Lines, Fuel Lines, Silicone Hose, etc.

Stainless Steel Brake Lines

 

[J-Thompson]

Mine were made by a local club member
Working good thus far

He worked at a place that made hoses for offshore use

 

[Ry' N Jen]

Try these:

Pre-Assembled Stainless Steel Braided Race Car Brake Lines

Stainless Steel Braided PTFE Hose, SS Braided PTFE Hose, SS Tube Stub Assemblies, Heat Pump Hose, Fan Coil Hookup, Power Trim Hose, Biodiesel, Brake Lines, Fuel Lines, Silicone Hose, etc.

Stainless Steel Brake Lines

Thanks Paul.
I'll look into both of those places.

Mine were made by a local club member
Working good thus far

He worked at a place that made hoses for offshore use

I made all my own for my Minis so I will most likely go that route depending on the prices of pre made lines.
Thing with Canada is everything is at minimum twice as expensive compared to the U.S.!
For example, an Aeroquip Dash 6 90 degree AN fitting retails for $40.00 plus here.
Across the line in Seattle they can be had for $23.00!

 

[tjkj2002]

The lines themselfs are cheap.Bought mine at classic tube.It's the junction blocks specific for the KJ that are very expensive and hard to find.

 

[Ry' N Jen]

The lines themselfs are cheap.Bought mine at classic tube.It's the junction blocks specific for the KJ that are very expensive and hard to find.

I see.
Is that a dealer specific part?
Thanks Bud.

 

[tjkj2002]

I see.
Is that a dealer specific part?
Thanks Bud.

The only way I've seen them is to buy the whole kits,JBA may sell just the junction blocks but then might as well buy the whole kit.The ones needed to use the braided lines are far different then OEM ones and you can not make/fab the OEM blocks to work with braided lines.

I bought the whole kit second hand(so damn cheap) and retained the main blocks when I did my SFA swap and got longer braided lines and banjo fittings to fit the new calipers.

 

[Ry' N Jen]

Gotcha Troy.
I'm heading to the local speed shop and see what I can price out and a buddy there always gives me jobber pricing and no tax. Might just get him to order a KJ specific part.
Apparently they can get kits for any vehicle.

 

[surfRenegade]

Im a big fan of Goodridge
Goodridge G-Stop Brake Line Kit - Jeep LIBERTY